Makita VC4710
3.2.3Auto-On/Off-Operation - "auto" switch position
The vacuum is switched on and off by the power tool connected. Mate- rial is picked up from the source im- mediately.
To comply with regulations, only ap- proved tools should be connected.
1.Switch off the power tool.
2.Switch off the vacuum.
Before setting the switch to "auto" position, ensure that the tool con- nected to the vacuum cleaner outlet is switched off.
0 |
auto |
3.Connect the power tool and the vacuum with a suction hose.
4.Insert the plug of the power tool into the tool outlet on the operating panel of the vacu- um.
5.Switch on the vacuum. Switch to "auto" position.
6.Switch on the power tool. The vacuum motor starts when the connected power tool is switched on.
When the power tool is switched off, the vacuum continues to run for a short moment so that any dust in the suction hose is drawn into the filter bag.
14 | Original Instruction |