basic engine
9
34
1
2
10
5
7
8
6
Figure 3. Yanmar L70V6 Engine Components
ENGINE COMPONENTS
Figure 3 illustrates the location of the major components for the Yanmar L70V6 diesel engine. The function of each component is described below
1.Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tighten securely. DO NOT over fill.
2.Fuel Tank – Capacity is 3.5 quarts (3.31 liters) of diesel fuel.
3.Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove
4.Muffler – Used to reduce noise and emissions.
5.Recoil Starting Handle (pull rope) – Type of engine starting method. Alternate type would be electric start (ignition key).
6.Recoil Starter –
7.Oil Filler Cap / Dipstick – Remove this cap to add oil to the engine crankcase. Read dipstick to determine if oil level is low. DO NOT over fill.
8.Oil Drain Plug – Unscrew plug to drain oil from engine crankcase. Dispose of oil in a safe manner.
9.Decompression Lever – Press down before starting engine.To prevent damage to engine, DO NOT use for any other purpose.
10.Fuel Cock – Controls the flow of diesel fuel to the carburetor. Must be in the ON position when starting and running the engine.
mvh306ds2/dsCPAs pLATE COMPACTOR • operation and parts manual — rev. #7 (02/04/14) — page 15