Karcher PS640G installation manual Normal Operation STEP-BY-STEP, Main Screen

NORMAL OPERATION - STEP-BY-STEP

A. Main Screen

1.When the unit has been “OFF” for more than 1 minute the controller will display the screen saver, as shown in Figure 3-1. To start operation, push the “Enter/Reset” button. The controller will display the “OFF” screen, as shown in Figure 3-2.

Figure 3-1 Screen Saver

The Middleby Corporation

1400 Toastmaster Drive

Elgin,IL 60120

Phone:847-741-3300

Fax: 847-741-0015

©2005 Middleby Corporation,All rightsreserved

2.Push the “ON/OFF” button to start the oven. The con- troller will display the screen, as shown in Figure 3-3.

Figure 3-3 Main Screen ON

	FRONT BELT JAMMED
		450 F
		BELT 01 SPEED
ON		4m. 30s.

ON/OFF button

Figure 3-2 Main Screen OFF

	The Middleby Corporation
		450 F
		BELT 01 SPEED
OFF		4m. 30s.

3.To change the temperature, push the “TEMP” button. The

controller will display the screen, shown in Figure 3-4. To change the temperature, push the “←” arrow button. Then push either the “↑” arrow or “↓” arrow buttons to increase or decrease temperatures respec- tively. When the proper temperature is entered, push the “Enter/Reset” button. The controller will now show the display shown in Figure 3-3.

Figure 3-4 Temperature Screen

	TEMPERATURE SET UP
		ACTUAL TEMP
		133.8 F
ON		450.0 F

TEMP Set button

17