M E M O R Y O P E R A T I O N
3.Setting SelectaProgram (except for Express Defrost) and Microwave Cooking
Each cooking mode has a maximum cooking time.
If the setting time exceeds the maximum time, the display will show an error message. Touch STOP/ CLEAR pad and program again. Read the following table carefully before setting the program.
Cooking mode | Maximum cooking time | |
Microwave 100 - 60 % | 20 min. | |
50 - 0 % | 40 min. | |
Normal Convection | 99 min. 99 sec. | |
High Speed Grill |
| |
High Speed Grill with Micro | 30 min. | |
Speed Grill | ||
| ||
Speed Grill with Micro |
| |
Speed Bake | 99 min. 99 sec. | |
Speed Roast | ||
| ||
|
|
*Suppose you want to set a program for 2 minutes at 70% microwave power level in memory 11.
P R O C E D U R E
1 Touch SET pad.
2 Touch number pad to select desired memory bank.
Enter desired program.
Touch SELECTA TIME pad.
3 Enter cooking time.
Touch SELECTA POWER pad 3 times or hold down
until the desired power level 
x 3 appears.
Touch SET pad twice to |
|
4 save the program. | x 2 |
NOTE:
1.For SelectaProgram modes,press the SELECTA PROGRAM pad desired times and SET pad instead of the SELECTA TIME pad at step 3.
2.More than two Speed Roast sequences cannot be set in one program at a time.
Setting Multiplier Factor for SelectaProgram (except for Express Defrost) and Microwave Cooking
Your oven is preset with a multiplier factor of 1.6 for double quantity and 2.0 for triple quantity.
You can change the multiplier for double or triple quantity and store it in memory.
*Suppose you want to set the multiplier to 1.67 for double quantity in memory 11.
P R O C E D U R E
1 Touch SET pad.
2 Touch DOUBLE/TRIPLE
QTY pad.
3 Touch number pad to select desired memory bank.
4 Touch SET pad.
Touch the number pad 2 to
5 change the multiplier factor for double quantity.
6 Enter desired multiplier factor.
7 | Touch SET pad twice to | x 2 |
| save the new multiplier. |
NOTE:
1.To change the multiplier for triple quantity, touch the number pad 3 at step 5.
2.The multiplier for Automatic Cooking and Express Defrost cannot be changed.
If you select any memory bank that has stored memory for any automatic cooking or Express Defrost program, an error message will appear in the display.
23