O T H E R C O N V E N I E N T F E A T U R E S
CUSTOM HELP
Custom Help provides 6 features that make using your oven easy because specific instructions are provided in the Interactive Display.
1. REFRESH CYCLE
Use the Refresh Cycle to
•Condition the heaters before using the oven the first time.
•Remove any objectionable odor.
Follow the procedure below. The oven temperature will be maintained at 450 °F when the Refresh Cycle oper- ates.
P R O C E D U R E
Touch CUSTOM HELP pad
1 twice.
x 2
2 Touch SET pad.
3 Touch START pad.
NOTE:
1.Remove the turntable from the oven before the Refresh Cycle. No food should be in the oven.
2.The Refresh Cycle is 30 minutes.
3.During the Refresh Cycle some smoke and odor may occur. Open a window or use the ventilation fan in the room.
Caution:
The oven door, outer cabinet and oven cavity will be hot.
2. SOUND ON/OFF
If you wish to have the oven operate with no audible signals, touch CUSTOM HELP 3 times , SET and then touch STOP/CLEAR.
To cancel and restore the audible signal, touch CUSTOM HELP 3 times, SET and then touch START.
3. COUNTER CHECK
You can check the total number of times the oven was used as well as the times each memory was used.
* Suppose you want to know the total number of times.
P R O C E D U R E
Touch CUSTOM HELP pad
1 4 times.
x 4
2 Touch SET pad.
Touch desired pad.
3 Touch SET pad for the total number.
NOTE:
1.To check the times each memory was used, touch desired memory number at step 3.
2.You can coninue to check the times in other memories by pressing the desired memory number after step 3.
3.The counter can count the times to 999999 for the total times and 9999 for each memory, and then it will return to 0.
4.To complete counter check, press STOP/CLEAR pad after step 3.
4.COUNTER CLEAR
You can clear total use time and total memory uses.
Clear the total number
* Suppose you want to clear the total use times.
P R O C E D U R E
Touch CUSTOM HELP pad
1 5 times.
x 5
2 Touch SET pad.
Touch desired pad
3 Touch SET pad for total number.
4 Touch SET pad to clear the times.
NOTE:
1.To clear memory use times, touch desired memory number at step 3.
2.You can continue to clear the times in other memories by repeating step 3 and step 4.
3.To complete counter clear, press STOP/CLEAR pad after step 4.
26