Alliance Laundry Systems Dishwasher manual Risers

Page 8

IMPORTANT: Hoses and other natural rubber parts deteriorate after extended use. Hoses may develop cracks, blisters or material wear from the temperature and constant high pressure they are subject to.

All hoses should be checked on a monthly basis for any visible signs of deterioration. Any hose showing the signs of deterioration listed above should be replaced immediately. All hoses should be replaced every five years.

1

 

2

 

 

 

 

WATER

 

 

MIXING VALVE

 

4

3

 

 

 

 

SWD596N

1

 

Water Faucets

2

 

Cold Water Connection

3

 

Hot Water Connection

4

 

Water Fill Hoses

Figure 6

IMPORTANT: Turn off water supply faucets after check-out and demonstration. Owner should turn off water supply whenever there will be an extended period of non-use.

NOTE: Longer fill hoses are available (as optional equipment at extra cost) if the hoses supplied with the washer are not long enough for the installation. Order hoses as follows:

No. 20617 Fill Hose (8 feet) (2.44 m)

No. 20618 Fill Hose (10 feet) (3.05 m)

Risers

Risers (or air cushions) may have to be installed if the pipes knock or pound when flow of water stops. The risers are more efficient when installed as close as possible to the water supply faucets (refer to Figure 7).

2

1

W005I

1Water Supply Faucets

2Risers (Air Cushions)

Figure 7

8

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802715

Image 8
Contents Installation Instructions What to do if YOU Smell GAS Dimensions Electric DryersBefore You Start SuppliesPosition and Level the Unit InstallationPosition Unit Near Installation Area Level Water Supply Connecting HosesConnect Fill Hoses Risers Standpipe Installation Wall InstallationLaundry Tub Installation Connect Drain Hose to Drain ReceptacleNatural Gas Altitude Adjustments Orifice Size Feet Inches Gas Dryer Only Connect Gas Supply PipeElectric Dryer Only Connect Electrical Plug Liquefied Petroleum Gas, 2500 Btu/ft3All Other Models Grounding InformationModel LTSA7A*N2989 Connecting Power Cord with Three-Wire Plug Longer than 15 ft .5 m use 8 AWGConnecting Power Cord with Four-Wire Plug Ground Screw Failure to exhaust dryer properly will void warranty Connect Dryer Exhaust System87 ft .4 m, as required to meet UL2158, clause 7.3.2A Exhaust DirectionExhaust System Important do not tip washer more than Washer Only Remove the Shock Sleeves and Shipping BraceWipe Out Inside of Washer Drum and Dryer Drum Gas Dryer Plug In the Washer and DryerElectric Dryer Washer All Models Except LTSA7A*N2989 Recheck steps Check Heat SourceElectric Dryers Gas DryersFor checking manifold pressure Page Fast Track for Installing the Unit

Dishwasher specifications

Alliance Laundry Systems is renowned for its commitment to quality and innovation in the field of commercial laundry and cleaning solutions. Among its impressive lineup, the Alliance Dishwasher stands out as a robust solution designed for heavy-duty performance, suited for commercial kitchens and establishments requiring efficient cleaning of dishware, glassware, and utensils.

One of the main features of Alliance Dishwashers is their exceptional cleaning capabilities. Equipped with advanced wash systems, these dishwashers effectively utilize high-pressure jets and strategically placed spray arms to ensure thorough washing, targeting every corner of the items being cleaned. The result is spotless dishes with minimal remaining contaminants, enhancing hygiene standards in any food service environment.

The technology behind Alliance Dishwashers incorporates intelligent controls that simplify operation. With user-friendly interfaces, staff can easily select from multiple washing cycles tailored to different types of loads. This versatility allows businesses to optimize energy consumption and water usage, contributing to lower operational costs while maintaining top-notch cleaning performance.

In terms of speed, Alliance Dishwashers are engineered for rapid turnarounds, often completing washing cycles in under five minutes. This feature is particularly beneficial for high-volume settings where efficiency is paramount. Additionally, many models include a built-in heat exchanger that efficiently manages water temperatures, fostering compliance with sanitation requirements and enhancing the effectiveness of the cleaning process.

Durability is another critical characteristic of Alliance Dishwashers. Constructed with high-quality stainless steel, these units resist corrosion, withstand the rigors of continual use, and maintain their appearance over time. This not only ensures longevity but also supports the maintenance of a pristine kitchen environment which is vital in the hospitality sector.

Energy efficiency is at the core of the Alliance Dishwasher design. Many models are ENERGY STAR certified, consuming less water and electricity while delivering powerful performance. This focus on sustainability not only helps businesses reduce their environmental footprint but also leads to significant cost savings.

In conclusion, the Alliance Dishwasher combines state-of-the-art technology, user-friendly features, and robust construction to meet the demands of modern commercial kitchens. From its powerful cleaning capabilities and rapid cycle times to its energy-efficient operation, the Alliance Dishwasher is an invaluable asset for any food service operation aiming for excellence in sanitation and efficiency.