Alliance Laundry Systems Dishwasher manual Level

Page 6

NOTE: Use of the dispenser drawer or unit doors as a handle in the transportation of the unit may cause damage to the dispenser or doors.

Place unit in position on a solid, sturdy and level floor. Installing the unit on any type of carpeting, soft tile, a platform or other weakly supported structures is not recommended.

Place a level on the cabinet top and check if the unit is level from side to side and front to back.

NOTE: Level must rest on raised portion of top panel. Refer to Figure 3.

 

1

5

 

4

 

3

 

 

2

 

SWD833N

1

Level

2

Rubber Foot

3

Leveling Leg

4

Locknut

5

Unit Base

Figure 3

If unit is not level, tilt unit to access the front and rear leveling legs. For easier access to leveling legs, prop up unit with a wooden block. Refer to Figure 4.

Loosen the locknuts and adjust legs by screwing into or out of unit base.

1

SWD832N

1Wood Block

Figure 4

Make sure that the unit does not rock. When unit is level and does not rock, tighten locknuts securely against bottom of unit base. If these locknuts are not tight, unit will move out of position during operation.

Leveling legs can be adjusted from inside the unit with a 7/8 inch deep well socket. All four legs must rest firmly on the floor so the weight of the unit is evenly distributed. The unit must not rock and must be level from side-to-side and front-to-back.

NOTE: Do not slide unit across floor once the leveling legs have been extended. Legs and base could become damaged.

Place rubber feet (supplied in accessories bag) on all four leveling legs. Refer to Figure 3.

Verify that unit does not rock.

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802715

Image 6
Contents Installation Instructions What to do if YOU Smell GAS Dimensions Electric DryersBefore You Start SuppliesInstallation Position Unit Near Installation AreaPosition and Level the Unit Level Connecting Hoses Connect Fill HosesWater Supply Risers Laundry Tub Installation Standpipe InstallationWall Installation Connect Drain Hose to Drain ReceptacleNatural Gas Altitude Adjustments Orifice Size Feet Inches Gas Dryer Only Connect Gas Supply PipeElectric Dryer Only Connect Electrical Plug Liquefied Petroleum Gas, 2500 Btu/ft3Grounding Information Model LTSA7A*N2989All Other Models Connecting Power Cord with Three-Wire Plug Longer than 15 ft .5 m use 8 AWGConnecting Power Cord with Four-Wire Plug Ground Screw Failure to exhaust dryer properly will void warranty Connect Dryer Exhaust SystemExhaust Direction Exhaust System87 ft .4 m, as required to meet UL2158, clause 7.3.2A Washer Only Remove the Shock Sleeves and Shipping Brace Wipe Out Inside of Washer Drum and Dryer DrumImportant do not tip washer more than Plug In the Washer and Dryer Electric DryerGas Dryer Washer All Models Except LTSA7A*N2989 Electric Dryers Recheck stepsCheck Heat Source Gas DryersFor checking manifold pressure Page Fast Track for Installing the Unit

Dishwasher specifications

Alliance Laundry Systems is renowned for its commitment to quality and innovation in the field of commercial laundry and cleaning solutions. Among its impressive lineup, the Alliance Dishwasher stands out as a robust solution designed for heavy-duty performance, suited for commercial kitchens and establishments requiring efficient cleaning of dishware, glassware, and utensils.

One of the main features of Alliance Dishwashers is their exceptional cleaning capabilities. Equipped with advanced wash systems, these dishwashers effectively utilize high-pressure jets and strategically placed spray arms to ensure thorough washing, targeting every corner of the items being cleaned. The result is spotless dishes with minimal remaining contaminants, enhancing hygiene standards in any food service environment.

The technology behind Alliance Dishwashers incorporates intelligent controls that simplify operation. With user-friendly interfaces, staff can easily select from multiple washing cycles tailored to different types of loads. This versatility allows businesses to optimize energy consumption and water usage, contributing to lower operational costs while maintaining top-notch cleaning performance.

In terms of speed, Alliance Dishwashers are engineered for rapid turnarounds, often completing washing cycles in under five minutes. This feature is particularly beneficial for high-volume settings where efficiency is paramount. Additionally, many models include a built-in heat exchanger that efficiently manages water temperatures, fostering compliance with sanitation requirements and enhancing the effectiveness of the cleaning process.

Durability is another critical characteristic of Alliance Dishwashers. Constructed with high-quality stainless steel, these units resist corrosion, withstand the rigors of continual use, and maintain their appearance over time. This not only ensures longevity but also supports the maintenance of a pristine kitchen environment which is vital in the hospitality sector.

Energy efficiency is at the core of the Alliance Dishwasher design. Many models are ENERGY STAR certified, consuming less water and electricity while delivering powerful performance. This focus on sustainability not only helps businesses reduce their environmental footprint but also leads to significant cost savings.

In conclusion, the Alliance Dishwasher combines state-of-the-art technology, user-friendly features, and robust construction to meet the demands of modern commercial kitchens. From its powerful cleaning capabilities and rapid cycle times to its energy-efficient operation, the Alliance Dishwasher is an invaluable asset for any food service operation aiming for excellence in sanitation and efficiency.