Alliance Laundry Systems Dishwasher manual Washer Only Remove the Shock Sleeves and Shipping Brace

Page 18

Step 8: (Washer Only) Remove the Shock Sleeves and Shipping Brace

Remove front access panel by removing the two screws at the bottom of the panel.

Remove the five bolts and lockwashers from shipping brace with 9/16 inch wrench and remove brace. Refer to Figure 22. One is holding the brace to the weight.

Remove this bolt first. Four bolts are located on the unit base. Remove the two front bolts next and then the two rear bolts. Remove all four shock sleeves by pulling on the yellow rope. Refer to Figure 22.

Remove the brace from the machine with shock sleeves and label attached to it.

IMPORTANT: The shipping brace, bolts, lockwashers and shock sleeves should be saved and MUST be reinstalled whenever the unit is moved more than 4 ft. (1.22 m). Do not lift or transport unit from front or without shipping materials installed. Refer to the Washer User’s Guide for proper instructions on reinstalling the shipping materials.

Store the shipping materials in the accessories bag. Save materials for use whenever the unit is moved.

On older models, remove label from front side of front access panel and place on back side of front access panel for future reference.

1

 

 

2

 

3

 

FLW2124N

 

4

 

FLW2124N

1

Shock Sleeves

2

Motor Mount

3

Hooked End of Shipping Brace

4

Bolts and Lockwashers

Figure 22

Reinstall front access panel.

IMPORTANT: DO NOT tip washer more than

6 inches (152.4 mm) in any direction after shipping brace has been removed. Shock absorbers may separate and damage to unit may result. For leveling purposes, the unit may be tilted a maximum of 6 inches (152.4 mm) in any direction.

Step 9: Wipe Out Inside of Washer Drum and Dryer Drum

Before using the washer and dryer for the first time, use an all-purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside the drums.

SWD834N

Figure 23

SWD603N

Figure 24

18

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802715

Image 18
Contents Installation Instructions What to do if YOU Smell GAS Dimensions Electric DryersBefore You Start SuppliesInstallation Position Unit Near Installation AreaPosition and Level the Unit Level Connecting Hoses Connect Fill HosesWater Supply Risers Laundry Tub Installation Standpipe InstallationWall Installation Connect Drain Hose to Drain ReceptacleNatural Gas Altitude Adjustments Orifice Size Feet Inches Gas Dryer Only Connect Gas Supply PipeElectric Dryer Only Connect Electrical Plug Liquefied Petroleum Gas, 2500 Btu/ft3Grounding Information Model LTSA7A*N2989All Other Models Connecting Power Cord with Three-Wire Plug Longer than 15 ft .5 m use 8 AWGConnecting Power Cord with Four-Wire Plug Ground Screw Failure to exhaust dryer properly will void warranty Connect Dryer Exhaust SystemExhaust Direction Exhaust System87 ft .4 m, as required to meet UL2158, clause 7.3.2A Washer Only Remove the Shock Sleeves and Shipping Brace Wipe Out Inside of Washer Drum and Dryer DrumImportant do not tip washer more than Plug In the Washer and Dryer Electric DryerGas Dryer Washer All Models Except LTSA7A*N2989 Electric Dryers Recheck stepsCheck Heat Source Gas DryersFor checking manifold pressure Page Fast Track for Installing the Unit

Dishwasher specifications

Alliance Laundry Systems is renowned for its commitment to quality and innovation in the field of commercial laundry and cleaning solutions. Among its impressive lineup, the Alliance Dishwasher stands out as a robust solution designed for heavy-duty performance, suited for commercial kitchens and establishments requiring efficient cleaning of dishware, glassware, and utensils.

One of the main features of Alliance Dishwashers is their exceptional cleaning capabilities. Equipped with advanced wash systems, these dishwashers effectively utilize high-pressure jets and strategically placed spray arms to ensure thorough washing, targeting every corner of the items being cleaned. The result is spotless dishes with minimal remaining contaminants, enhancing hygiene standards in any food service environment.

The technology behind Alliance Dishwashers incorporates intelligent controls that simplify operation. With user-friendly interfaces, staff can easily select from multiple washing cycles tailored to different types of loads. This versatility allows businesses to optimize energy consumption and water usage, contributing to lower operational costs while maintaining top-notch cleaning performance.

In terms of speed, Alliance Dishwashers are engineered for rapid turnarounds, often completing washing cycles in under five minutes. This feature is particularly beneficial for high-volume settings where efficiency is paramount. Additionally, many models include a built-in heat exchanger that efficiently manages water temperatures, fostering compliance with sanitation requirements and enhancing the effectiveness of the cleaning process.

Durability is another critical characteristic of Alliance Dishwashers. Constructed with high-quality stainless steel, these units resist corrosion, withstand the rigors of continual use, and maintain their appearance over time. This not only ensures longevity but also supports the maintenance of a pristine kitchen environment which is vital in the hospitality sector.

Energy efficiency is at the core of the Alliance Dishwasher design. Many models are ENERGY STAR certified, consuming less water and electricity while delivering powerful performance. This focus on sustainability not only helps businesses reduce their environmental footprint but also leads to significant cost savings.

In conclusion, the Alliance Dishwasher combines state-of-the-art technology, user-friendly features, and robust construction to meet the demands of modern commercial kitchens. From its powerful cleaning capabilities and rapid cycle times to its energy-efficient operation, the Alliance Dishwasher is an invaluable asset for any food service operation aiming for excellence in sanitation and efficiency.