Alliance Laundry Systems Dishwasher Recheck steps, Check Heat Source, Electric Dryers, Gas Dryers

Page 21

When plugging in the washer:

DO NOT overload circuits.

DO NOT use an extension cord.

DO NOT use an adapter.

DO NOT operate both a washer and gas dryer on the same circuit. Use separately fused 15 Amp circuits.

The washer is designed to be operated on a separate branch, polarized, three-wire, effectively grounded, 120 Volt, 60 Hertz, AC (alternating current) circuit protected by a 15 Amp fuse, equivalent fusetron or circuit breaker.

The three-prong grounding plug on the power cord should be plugged directly into a polarized three-slot effectively grounded receptacle rated 110/120 Volts AC (alternating current) 15 Amps. Refer to Figure 27 to determine correct polarity of the wall receptacle.

WARNING

To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electric power source.

W082

Grounding Information

The washer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

The washer is equipped with a cord having an equipment-grounding conductor and a 3-prong grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the washer is properly grounded.

W216

Do not modify the plug provided with the washer – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

NOTE: Have a qualified electrician check the polarity of the wall receptacle. If a voltage reading is measured other than that in Figure 27, the qualified electrician should correct the problem.

WARNING

This unit is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.

W213

Step 11: Recheck steps 1-10

Refer to Installer Checklist on the back cover of this manual and make sure that unit is installed correctly.

Run washer through one complete cycle to make sure it is operating properly.

Step 12: Check Heat Source

Electric Dryers

Close the loading door and start the dryer in a heat setting (refer to the Dryer User’s Guide supplied with the unit). After the dryer has operated for three minutes, the exhaust air or exhaust pipe should be warm.

Gas Dryers

IMPORTANT: This operation is to be conducted by qualified personnel only.

To view the burner flame, remove the lower front panel of the dryer.

Close the loading door, start the dryer in a heat setting (refer to the Dryer User’s Guide supplied with the unit); the unit will start, the igniter will glow red and the main burner will ignite.

IMPORTANT: If all air is not purged out of gas line, gas igniter may go off before gas is ignited. If this happens, after approximately two minutes igniter will again attempt gas ignition.

IMPORTANT: If igniter does not light, make sure gas is turned on.

802715

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

21

Image 21
Contents Installation Instructions What to do if YOU Smell GAS Electric Dryers DimensionsSupplies Before You StartInstallation Position Unit Near Installation AreaPosition and Level the Unit Level Connecting Hoses Connect Fill HosesWater Supply Risers Wall Installation Standpipe InstallationLaundry Tub Installation Connect Drain Hose to Drain ReceptacleGas Dryer Only Connect Gas Supply Pipe Natural Gas Altitude Adjustments Orifice Size Feet InchesLiquefied Petroleum Gas, 2500 Btu/ft3 Electric Dryer Only Connect Electrical PlugGrounding Information Model LTSA7A*N2989All Other Models Longer than 15 ft .5 m use 8 AWG Connecting Power Cord with Three-Wire PlugConnecting Power Cord with Four-Wire Plug Ground Screw Connect Dryer Exhaust System Failure to exhaust dryer properly will void warrantyExhaust Direction Exhaust System87 ft .4 m, as required to meet UL2158, clause 7.3.2A Washer Only Remove the Shock Sleeves and Shipping Brace Wipe Out Inside of Washer Drum and Dryer DrumImportant do not tip washer more than Plug In the Washer and Dryer Electric DryerGas Dryer Washer All Models Except LTSA7A*N2989 Check Heat Source Recheck stepsElectric Dryers Gas DryersFor checking manifold pressure Page Fast Track for Installing the Unit

Dishwasher specifications

Alliance Laundry Systems is renowned for its commitment to quality and innovation in the field of commercial laundry and cleaning solutions. Among its impressive lineup, the Alliance Dishwasher stands out as a robust solution designed for heavy-duty performance, suited for commercial kitchens and establishments requiring efficient cleaning of dishware, glassware, and utensils.

One of the main features of Alliance Dishwashers is their exceptional cleaning capabilities. Equipped with advanced wash systems, these dishwashers effectively utilize high-pressure jets and strategically placed spray arms to ensure thorough washing, targeting every corner of the items being cleaned. The result is spotless dishes with minimal remaining contaminants, enhancing hygiene standards in any food service environment.

The technology behind Alliance Dishwashers incorporates intelligent controls that simplify operation. With user-friendly interfaces, staff can easily select from multiple washing cycles tailored to different types of loads. This versatility allows businesses to optimize energy consumption and water usage, contributing to lower operational costs while maintaining top-notch cleaning performance.

In terms of speed, Alliance Dishwashers are engineered for rapid turnarounds, often completing washing cycles in under five minutes. This feature is particularly beneficial for high-volume settings where efficiency is paramount. Additionally, many models include a built-in heat exchanger that efficiently manages water temperatures, fostering compliance with sanitation requirements and enhancing the effectiveness of the cleaning process.

Durability is another critical characteristic of Alliance Dishwashers. Constructed with high-quality stainless steel, these units resist corrosion, withstand the rigors of continual use, and maintain their appearance over time. This not only ensures longevity but also supports the maintenance of a pristine kitchen environment which is vital in the hospitality sector.

Energy efficiency is at the core of the Alliance Dishwasher design. Many models are ENERGY STAR certified, consuming less water and electricity while delivering powerful performance. This focus on sustainability not only helps businesses reduce their environmental footprint but also leads to significant cost savings.

In conclusion, the Alliance Dishwasher combines state-of-the-art technology, user-friendly features, and robust construction to meet the demands of modern commercial kitchens. From its powerful cleaning capabilities and rapid cycle times to its energy-efficient operation, the Alliance Dishwasher is an invaluable asset for any food service operation aiming for excellence in sanitation and efficiency.