Moyer Diebel MH-6NM2, MH-60M2, MH-6LM2 technical manual Drain Connections, Ventilation

Page 15

INSTALLATION

Water Connections (Cont.)

2.A manual shut-off valve for steam and water (supplied by others) should be installed in the supply line to allow for servicing of the machine. The shut-off valve should be the same size or larger than the supply line.

3.Install a 3/4” pressure reducing valve, (PRV), in the water supply line if flow pressure exceeds 20-22 PSI/138-151.8 kPa.

A PRV is standard equipment on Model MH-60. A PRV is not standard equipment on Models MH-6N, MH-6L.

Drain Connections

Refer to Fig. 9

1.MH series models are GRAVITY DRAIN machines equipped with a

1-1/2" O.D. hose connection point.

2.Drain height for all models must not exceed 11" (280mm) above floor level.

3.The drain connection is made to the dishwasher from underneath the machine through an access hole in the machine base.

Ventilation

NOTE:

Ventilation must comply with local sanitary and plumbing codes.

CAUTION:

!Exhaust air should not be vented into a wall, ceiling, or concealed space of a building. Condensation can cause damage.

Figure 9

Drain Hose Connection

1-1/2" O.D.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents MH-6LM2 MH-6NM2Moyer Diebel, US Revision History Contents List of Figures Limited Warranty Welcome to Moyer Diebel IntroductionAccessories Standard Equipment includesOptions MH-60 only Electrical Power Requirements Unpack the dishwasher InstallationPlacement for Corner Operation Electrical Connections InstallationHinged Control Panel Water Connections Plumbing ConnectionsVentilation Drain ConnectionsChemical Connections Chemical Dispenser Signal Terminal BlockChemical Connections Complete the installation Install the Scrap Screens Drain-Overflow AssemblyInitial START-UP Initial START-UP Check Wash Water TemperatureInitial START-UP Check Final Rinse Water Pressure Check Final Rinse Water TemperatureExtended Wash Operation Complete the initial start-upDrain the dishwasher Initial START-UP Action Result Operation SummaryCleaning Schedule CleaningDeliming Condition Cause Solution TroubleshootingTroubleshooting Troubleshooting Basic ServiceMotor Overloads Electrical ServiceElectrical Service Timers Cycle TimerFill Timer Configuration a Electrical Service Motor Connections Pump Seal Replacement Mechanical ServiceReplacement Parts Door Assemblies and Panels Part Part Description Qty Item No Door Assemblies and PanelsDoor Safety Switch and Instrument Panel Door Safety Switch Instrument Panel 1112 Door Handle Assembly and Springs Track Assembly Corner configuration shown Track Assembly Model MH-60 Fill Piping Assembly MH-6L MH-6N, MH-6L Wash/Rinse Spray Arm Assembly WASH/RINSE Spray ARM Assembly MH-60, MH-6N, MH-6L Wash/Rinse Spray Piping Assembly WASH/RINSE Spray Piping Assembly Scrap Screens and Drain Assembly Scrap Screens and Drain Assembly Pump Assembly Pump Assembly Wash Tank Heater and Thermostats 0509185 Wash Tank Heater and ThermostatsMH-60 Only Electric Booster Assembly MH-60 only Electric Booster Assembly 1419 1520 Control Cabinet Dishracks 101285 DishracksElectrical Schematics Diagram State End of Cycle Power- Off Door- Closed Timer Chart

MH-6LM2, MH-60M2, MH-6NM2 specifications

Moyer Diebel has made a significant impact in the commercial dishwashing sector with its innovative models such as the MH-6NM2, MH-60M2, and MH-6LM2. These commercial dishwashers cater to a range of operational needs, ensuring high efficiency, reliability, and ease of use, vital for any busy kitchen environment.

The MH-6NM2 model serves as an exemplary choice for establishments requiring a high-capacity solution. This dishwasher boasts a unique design that allows for rapid wash cycles, ensuring dishes and utensils are cleaned within minutes. With a large wash chamber, the MH-6NM2 is capable of accommodating a variety of dish types, including plates, pots, and pans. Its high-temperature wash feature not only guarantees sanitation but also enhances drying efficiency. Additionally, the model is equipped with an advanced rinse system that minimizes water usage while maximizing cleaning results, making it an eco-friendly choice for modern kitchens.

Moving to the MH-60M2, this model stands out with its impressive versatility. Designed for medium to large operations, it features robust construction and an array of programmable cycle options. The MH-60M2 includes user-friendly controls and a digital display that simplifies operation and monitoring. Its innovative filtration system significantly reduces maintenance needs by ensuring that food particles do not hinder performance. The machine is also designed to operate quietly, which is an essential feature in busy dining environments where noise control is paramount.

The MH-6LM2 is engineered to meet the demands of high-volume usage in delicate environments, such as fine dining restaurants. This model combines efficiency with advanced cleaning technology, allowing for gentle handling of glassware while providing exceptional cleaning results. The MH-6LM2's energy-efficient design not only cuts down on utility bills but also supports sustainability efforts by reducing water consumption. Its built-in self-diagnostics capabilities allow for easy troubleshooting and maintenance, reducing downtime and ensuring that the kitchen runs smoothly.

In summary, Moyer Diebel's MH-6NM2, MH-60M2, and MH-6LM2 models reflect the company’s commitment to excellence in commercial dishwashing. With advanced technologies, user-friendly features, and a focus on efficiency and sustainability, these machines are well-suited for various commercial applications, providing reliable performance that meets the high demands of any kitchen.
Top Page Image Contents