Operation
Operation
Operation Procedures
1.Check that the spray arms, overflow tube and scrap screens are in place.
2.Close the door. Press the POWER switch. The tank will begin to fill with water.
This procedure is only needed when the tank is empty.
3.When the tank is full, check the wash tank temperature gauge. Minimum wash temperature is 150°F/66°C.
4.Scrap and preflush all items to be washed, load items into rack. Wash only one layer of silverware in a rack at a time.
Note: DO NOT OVERLOAD the rack.
5.Open the door and insert the rack of wares into the machine.
6.Close the door. Press the START switch and hold for 1 second, then release. This will start the wash cycle. The light illuminates.
Note: The machine may be stopped at any time during the cycle by opening the door. Closing the door resumes the cycle where it was stopped.
8