flexibility to permit the machine to be moved for cleaning without having to disconnect any wiring.
ii.Run your dispenser wires through the conduit to the control box.
iii.Run your probe wires to the control box.
iv.With the machine’s power “OFF”, connect your detergent and rinse dispenser wires to the red and blue terminals of the power block supplied inside the control box. The table that follows lists the function of each conductor of the multi- conductor electrical cable.
Wire Colors | Circuit Voltage | Function |
Gray/Violet | 200 | Main AC Power |
Brown | 200 | Main AC Power |
Black | No Connection. Insulate this wire! | This wire is LIVE! |
Yellow | 24 | Detergent Signal |
White/Yellow | 24 | Detergent Signal |
Violet | 24 | Rinse Signal |
White/Violet | 24 | Rinse Signal |
The individual conductors need to be connected as shown on the wire diagram below. Probe wires are to be striped, crimped on barrel male and female connectors provided, and connected to the
MODEL | Page 6 |