Installation Manual
Models ECCB/TCCB 30” – 36” ENGLISH
Step 4
Four clamp brackets are provided to clamp the cooktop to the countertop. The bracket may be installed before the cooktop is placed into the cutout. Install the clamp brackets as shown on the front and back of the box then rotate brackets so that they do not extend beyond edge of burner box bottom. Tighten screws just enough to hold brackets in place when cooktop is put into cutout.
Figure 8.
Step 5
Insert the cooktop centered into the cutout opening. Make sure the front edge of the counter top is parallel to the cooktop. Make final check that all required clearances are met.
Step 6
Loosen the screws, rotate the brackets so that they extend beyond edge of the burner box. Tighten screws securely.
Figure 10.
Figure 9.
10