3.Use the funnel to fill the salt container with salt.
electrolux 7
4.Remove the salt around the opening of the salt container.
5.Turn the cap clockwise to close the salt container.
It is normal that water overflows from the salt container when you fill it with salt.
When you set electronically the water soft- ener to level 1, the salt indicator light does not stay on.
Use of rinse aid
Caution! Only use branded rinse aid for dishwashers.
Do not fill the rinse aid dispenser with other products (e.g. dishwasher clean- ing agent, liquid detergent). This can cause damage to the appliance.
Rinse aid makes it possible to dry the dishes without streaks and stains. Rinse aid is automatically added during the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1.Press the release button (A) to open the rinse aid dispenser.
2.Fill the rinse aid dispenser with rinse aid. The mark 'max.' shows the maximum level.
3.Remove the spilled rinse aid with an ab- sorbent cloth to prevent too much foam during the subsequent washing pro- gramme.
4.Close the rinse aid dispenser.
Adjusting the rinse aid dosage
The rinse aid is set at the factory at position 4.
You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest dosage).