Jettech Metal Products FX-44 operation manual CAP.1 Introduction, Terminology

Page 5

CAP.1 INTRODUCTION

This manual provides important instructions about safe installation, use and maintenance of the dishwasher, so it is crucial that you read it carefully.

Careful installation and accurate and constant maintenance will ensure you years of safe operation and perfect washing results of your dishwasher.

Please consult the manufacturer for any need for service. Please keep in mind that non-compliance with the instructions contained in this manual will cancel the warranty. We recommend you retain this manual for future reference.

We remind you that the warranty does not cover:

Damage caused by transport. If this should occur, the customer must report it to the dealer before the dishwasher in question is installed.

Damage caused by incorrect installation. It is therefore compulsory that installation and testing be performed by qualified and skilled personnel.

Damage caused by any use other than that for which the machine has been manufactured. Damage caused by non-compliance with the provided instructions.

The installer must:

Check for perfect electrical connection and in particular good earthing, as well as the presence of a suitable earth- leakage breaker and a circuit breaker.

Make sure that the wall-mounted circuit breaker is easily accessible and close to the machine. Test the machine and make sure there is no malfunction.

Inform and train the personnel in charge of operating the machine about its use and the hazards it generates. Agree with the user on a periodic check of the machine according to how much the machine is used.

TERMINOLOGY

The terms “main switch”, “on-off valve” and “drain line” are used in this manual with the following meanings:

Main switch:

￿It must be a circuit breaker with thermal magnetic tripping mechanism able to completely cut off the power supply from the dishwasher.

￿It must be installed outside the dishwasher but close to it.

￿It must supply one appliance only.

On-off valve:

￿Monodirectional on-off gate or ball valve able to quickly and completely turn off the water supply.

￿It must be installed outside the dishwasher but close to it.

￿It must supply one appliance only.

Drain line:

￿It must consist of one flux trap

￿It must have a suitable size for draining double the flow rate indicated in the table.

2

Image 5
Contents FX-44 JET-TECH Systems Corp Manufacturers Limited Warranty Maintenance InstallationIntroduction Dishwasher Handling and TransportTerminology CAP.1 IntroductionCAP.2 Dishwasher Handling and Transport CAP.3 Danger Zones and Safety MechanismsElectrical connections CAP.4 InstallationRemoval from packing and positioning Plumbing connections Limit switch connectionConnection to the drainage Commissioniing filling the Booster TankAdjusting the controls Adjusting the amount of rinse aid Detergent measuring device optional adjustment Commissioning the detergent and rinse aid measuring device Checks and inspections After InstallationCAP.5 Dishwasher USE Setting up the dishwasher for usePrevention measure recommendations Using the dishwasher Periodic Maintenance to be performed at least every 20 days CAP.6 MaintenanceMachine use prec autions Operations to be performed at the end of the work cycleCAP.7 Dismantling DOS and do Nots with the DishwasherSelf-diagnosis JET-TECH Systems Garantie Limitée DU Fabricant Demontage Utilisation DU LAVE-VAISSELLEEntretien Terminologie CAP.3 Zones Dangereuses ET Mécanismes DE Sécurité CAP.2 Manutention ET Transport DU LAVE-VAISSELLERaccordements électriques Déballage et mise en placeRaccordements de plomberie Mise en service remplissage de la chaudièreRaccordement au circuit de vidange Raccordement du contacteur de fin de courseRéglage des commandes Affichage des températures et temps de fonctionnement Réglage de la quantité de liquide de rinçageDispositif de dosage du détergent option réglage Jusqu’à ce que le message Contrôles et inspections Apres Installation Recommandations concernant les mesures de protectionMise en route du lave-vaisselle CAP.5 Utilisation DU LAVE-VAISSELLEPréparation à l’utilisation du lave-vaisselle Opérations à effectuer à la fin du cycle de travail Précautions lors de l’utilisation de la machineDispositions générales CAP.6 EntretienEntretien Periodique à faire au moins tous les 20 jours Faire ET NE PAS FaireCAP.7 Demontage AutodiagnosticPage MDI 80ETL

FX-44 specifications

Jettech Metal Products has garnered a reputation for excellence in manufacturing high-quality industrial components, and their FX-44 series exemplifies this commitment. The FX-44, designed for versatility and robustness, stands out in the realm of metal products, offering innovative solutions for various industries, including automotive, aerospace, and heavy machinery.

One of the main features of the FX-44 is its remarkable strength-to-weight ratio. Constructed from advanced alloys, this product delivers superior performance without unnecessary bulk. This characteristic is especially beneficial in applications where weight reduction is crucial, such as in aerospace components, allowing for improved fuel efficiency and performance.

Another noteworthy aspect of the FX-44 is its exceptional resistance to corrosion and wear. The application of cutting-edge surface treatments significantly enhances its durability, making it suitable for use in harsh environments. This is particularly important in industries like oil and gas, where components are often exposed to corrosive substances and extreme temperatures.

The FX-44 also incorporates precision engineering techniques, ensuring tight tolerances and consistent quality throughout the manufacturing process. This attention to detail minimizes the risk of failure and increases the reliability of the components, providing peace of mind to OEMs and end-users alike.

Additionally, the FX-44 is designed with adaptability in mind. Its modular design allows for easy integration into existing systems and can be customized to meet specific client needs. This flexibility makes it a popular choice among engineers looking to optimize their projects without compromising performance or safety.

Advanced manufacturing technologies play a vital role in the production of the FX-44. Utilizing state-of-the-art CNC machining and additive manufacturing techniques, Jettech Metal Products can produce complex geometries that were previously unattainable. This capability not only enhances the design possibilities but also contributes to reduced lead times and increased production efficiency.

In summary, the Jettech Metal Products FX-44 is a testament to modern engineering and manufacturing excellence. With its superior strength-to-weight ratio, corrosion resistance, precision engineering, adaptability, and the application of advanced technologies, the FX-44 is poised to meet the demanding needs of today's industrial landscape, proving to be a reliable choice for professionals across various sectors.