Jettech Metal Products FX-44 operation manual CAP.2 Dishwasher Handling and Transport

Page 6

CAP.2 DISHWASHER HANDLING AND TRANSPORT

2.1Transport and packing

￿The dishwasher must be transported using suitable means.

￿The appliance must be packed in a cardboard box on a wooden pallet.

2.2Handling

￿The hitch points are indicated on the packing box.

￿The dishwasher must be handled using a lift trolley.

￿Do not sling the dishwasher with ropes.

CAP.3 DANGER ZONES AND SAFETY MECHANISMS

Identification of the danger zones and relevant type of hazard and general description of the safety measures.

3.1Danger of burns:

￿On the booster tank and the rinsing circuit during machine installation and maintenance.

3.2Hazardous electric current:

￿On the main electrical control panel

￿On washing and rinsing pumps

￿On electric resistances

Protection of the dishwasher's hazardous parts

￿The panels are the protection that limits access to the internal components.

￿The panels are fixed with screws

Residual risks

￿Do not open the doors of the dishwasher during operation.

￿Do not introduce bare hands in the washing tank.

￿Do not remove the machine panels before disconnecting the power supply.

3.3Safety devices:

Magnetic microswitch

￿Device that interrupts filling, washing and rinsing operations when the hood or door is opened.

Thermal amperometric protection element

￿Motor pumps with incorporated automatic reset thermal switch which cuts off the motor’s electric power supply in case of anomalous operation.

Safety thermostat

￿In case the temperature control breaks, a second safety contact thermostat with manual reset comes into operation and interrupts the resistive elements’ operation.

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents FX-44 JET-TECH Systems Corp Manufacturers Limited Warranty Introduction InstallationMaintenance Dishwasher Handling and TransportCAP.1 Introduction TerminologyCAP.3 Danger Zones and Safety Mechanisms CAP.2 Dishwasher Handling and TransportCAP.4 Installation Removal from packing and positioningElectrical connections Connection to the drainage Limit switch connectionPlumbing connections Commissioniing filling the Booster TankAdjusting the controls Adjusting the amount of rinse aid Detergent measuring device optional adjustment Commissioning the detergent and rinse aid measuring device After Installation Checks and inspectionsSetting up the dishwasher for use Prevention measure recommendationsCAP.5 Dishwasher USE Using the dishwasher Machine use prec autions CAP.6 MaintenancePeriodic Maintenance to be performed at least every 20 days Operations to be performed at the end of the work cycleDOS and do Nots with the Dishwasher Self-diagnosisCAP.7 Dismantling JET-TECH Systems Garantie Limitée DU Fabricant Utilisation DU LAVE-VAISSELLE EntretienDemontage Terminologie CAP.2 Manutention ET Transport DU LAVE-VAISSELLE CAP.3 Zones Dangereuses ET Mécanismes DE SécuritéDéballage et mise en place Raccordements électriquesRaccordement au circuit de vidange Mise en service remplissage de la chaudièreRaccordements de plomberie Raccordement du contacteur de fin de courseRéglage des commandes Réglage de la quantité de liquide de rinçage Affichage des températures et temps de fonctionnementDispositif de dosage du détergent option réglage Jusqu’à ce que le message Contrôles et inspections Recommandations concernant les mesures de protection Apres InstallationCAP.5 Utilisation DU LAVE-VAISSELLE Préparation à l’utilisation du lave-vaisselleMise en route du lave-vaisselle Précautions lors de l’utilisation de la machine Opérations à effectuer à la fin du cycle de travailEntretien Periodique à faire au moins tous les 20 jours CAP.6 EntretienDispositions générales Faire ET NE PAS FaireAutodiagnostic CAP.7 DemontagePage MDI 80ETL

FX-44 specifications

Jettech Metal Products has garnered a reputation for excellence in manufacturing high-quality industrial components, and their FX-44 series exemplifies this commitment. The FX-44, designed for versatility and robustness, stands out in the realm of metal products, offering innovative solutions for various industries, including automotive, aerospace, and heavy machinery.

One of the main features of the FX-44 is its remarkable strength-to-weight ratio. Constructed from advanced alloys, this product delivers superior performance without unnecessary bulk. This characteristic is especially beneficial in applications where weight reduction is crucial, such as in aerospace components, allowing for improved fuel efficiency and performance.

Another noteworthy aspect of the FX-44 is its exceptional resistance to corrosion and wear. The application of cutting-edge surface treatments significantly enhances its durability, making it suitable for use in harsh environments. This is particularly important in industries like oil and gas, where components are often exposed to corrosive substances and extreme temperatures.

The FX-44 also incorporates precision engineering techniques, ensuring tight tolerances and consistent quality throughout the manufacturing process. This attention to detail minimizes the risk of failure and increases the reliability of the components, providing peace of mind to OEMs and end-users alike.

Additionally, the FX-44 is designed with adaptability in mind. Its modular design allows for easy integration into existing systems and can be customized to meet specific client needs. This flexibility makes it a popular choice among engineers looking to optimize their projects without compromising performance or safety.

Advanced manufacturing technologies play a vital role in the production of the FX-44. Utilizing state-of-the-art CNC machining and additive manufacturing techniques, Jettech Metal Products can produce complex geometries that were previously unattainable. This capability not only enhances the design possibilities but also contributes to reduced lead times and increased production efficiency.

In summary, the Jettech Metal Products FX-44 is a testament to modern engineering and manufacturing excellence. With its superior strength-to-weight ratio, corrosion resistance, precision engineering, adaptability, and the application of advanced technologies, the FX-44 is poised to meet the demanding needs of today's industrial landscape, proving to be a reliable choice for professionals across various sectors.
Top Page Image Contents