Jettech Metal Products FX-44 Prevention measure recommendations, CAP.5 Dishwasher USE

Page 14

4.12 Prevention measure recommendations:

We recommend you carefully follow the instructions below in order to maintain the dishwasher in perfect and safe operational conditions:

￿Use the appliance only for the purpose it has been designed for.

￿Any other use is considered improper and dangerous.

￿Use baskets suitable for dishes to load and unload the machine.

￿Do not leave the machine exposed to atmospheric agents.

￿DO NOT bypass the safety devices of the machine (microswitches, thermostats) envisaged by the manufacturer.

￿DO NOT operate the machine if it is not connected correctly and all safety devices are not operating.

￿Have any repair performed only at the manufacturer’s premises or at authorised service centres; only genuine spare parts must be used.

￿Failure to follow these instructions may jeopardise safety of the machine.

￿Do not leave the machine on if not in use.

￿We recommend you do not use steel brushes or sponges, acid products and corrosive substances to clean stainless steel.

￿Never start the machine washing cycle without the overflow in the tank.

￿Before emptying the machine, always turn it off using the wall-mounted switch.

￿Never move any magnetic objects close to the machine, it could start even with the hood open.

￿Never use the hood as a support surface.

￿Do not wash the machine using direct jets of water.

￿Always close the water supply when the machine is not being used.

￿Never open the machine hood quickly if it has not finished the cycle.

￿Never immerse bare hands in the washing solutions.

￿Never remove the machine panels if the upstream electricity supply has not been previously disconnected.

￿The machine must not be used by untrained personnel.

￿Never use the machine without protections.

￿Do not use the machine to wash objects of shapes, types and sizes that are not compatible with those declared by the manufacturer.

Turn off the machine immediately using the main switch if you notice any water leaks coming from the machine.

CAP.5 DISHWASHER USE

5.1DISHWASHER USE :

A : Line button

B : Display

C : Speed selection button

D:Start cycle button

E:Machine on lamp

F:Autotimer on lamp

G:Booster heating lamp

H:Tank heating lamp

I:Machine filling lamp

L:Failure lamp on.

5.2Setting up the dishwasher for use:

￿Open the wall-mounted water valve

￿Switch on the wall-mounted line switch

￿Place the overflow and washing filters in their envisaged positions

11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents FX-44 JET-TECH Systems Corp Manufacturers Limited Warranty Introduction InstallationMaintenance Dishwasher Handling and TransportCAP.1 Introduction TerminologyCAP.3 Danger Zones and Safety Mechanisms CAP.2 Dishwasher Handling and TransportElectrical connections CAP.4 InstallationRemoval from packing and positioning Connection to the drainage Limit switch connectionPlumbing connections Commissioniing filling the Booster TankAdjusting the controls Adjusting the amount of rinse aid Detergent measuring device optional adjustment Commissioning the detergent and rinse aid measuring device After Installation Checks and inspectionsCAP.5 Dishwasher USE Setting up the dishwasher for usePrevention measure recommendations Using the dishwasher Machine use prec autions CAP.6 MaintenancePeriodic Maintenance to be performed at least every 20 days Operations to be performed at the end of the work cycleCAP.7 Dismantling DOS and do Nots with the DishwasherSelf-diagnosis JET-TECH Systems Garantie Limitée DU Fabricant Demontage Utilisation DU LAVE-VAISSELLEEntretien Terminologie CAP.2 Manutention ET Transport DU LAVE-VAISSELLE CAP.3 Zones Dangereuses ET Mécanismes DE SécuritéDéballage et mise en place Raccordements électriquesRaccordement au circuit de vidange Mise en service remplissage de la chaudièreRaccordements de plomberie Raccordement du contacteur de fin de courseRéglage des commandes Réglage de la quantité de liquide de rinçage Affichage des températures et temps de fonctionnementDispositif de dosage du détergent option réglage Jusqu’à ce que le message Contrôles et inspections Recommandations concernant les mesures de protection Apres InstallationMise en route du lave-vaisselle CAP.5 Utilisation DU LAVE-VAISSELLEPréparation à l’utilisation du lave-vaisselle Précautions lors de l’utilisation de la machine Opérations à effectuer à la fin du cycle de travailEntretien Periodique à faire au moins tous les 20 jours CAP.6 EntretienDispositions générales Faire ET NE PAS FaireAutodiagnostic CAP.7 DemontagePage MDI 80ETL

FX-44 specifications

Jettech Metal Products has garnered a reputation for excellence in manufacturing high-quality industrial components, and their FX-44 series exemplifies this commitment. The FX-44, designed for versatility and robustness, stands out in the realm of metal products, offering innovative solutions for various industries, including automotive, aerospace, and heavy machinery.

One of the main features of the FX-44 is its remarkable strength-to-weight ratio. Constructed from advanced alloys, this product delivers superior performance without unnecessary bulk. This characteristic is especially beneficial in applications where weight reduction is crucial, such as in aerospace components, allowing for improved fuel efficiency and performance.

Another noteworthy aspect of the FX-44 is its exceptional resistance to corrosion and wear. The application of cutting-edge surface treatments significantly enhances its durability, making it suitable for use in harsh environments. This is particularly important in industries like oil and gas, where components are often exposed to corrosive substances and extreme temperatures.

The FX-44 also incorporates precision engineering techniques, ensuring tight tolerances and consistent quality throughout the manufacturing process. This attention to detail minimizes the risk of failure and increases the reliability of the components, providing peace of mind to OEMs and end-users alike.

Additionally, the FX-44 is designed with adaptability in mind. Its modular design allows for easy integration into existing systems and can be customized to meet specific client needs. This flexibility makes it a popular choice among engineers looking to optimize their projects without compromising performance or safety.

Advanced manufacturing technologies play a vital role in the production of the FX-44. Utilizing state-of-the-art CNC machining and additive manufacturing techniques, Jettech Metal Products can produce complex geometries that were previously unattainable. This capability not only enhances the design possibilities but also contributes to reduced lead times and increased production efficiency.

In summary, the Jettech Metal Products FX-44 is a testament to modern engineering and manufacturing excellence. With its superior strength-to-weight ratio, corrosion resistance, precision engineering, adaptability, and the application of advanced technologies, the FX-44 is poised to meet the demanding needs of today's industrial landscape, proving to be a reliable choice for professionals across various sectors.
Top Page Image Contents