Jura Capresso Z9 Espresso and coffee, Preparation in ‘coffee à la carte’ mode, ‘Café à la carte’

Page 19

 

 

2 Preparation

Espresso and coffee

‘Espresso’ and ‘Coffee’ are prepared at the touch of a button

 

 

following this model.

 

 

Example: Proceed as follows to prepare one coffee at the touch of a

 

 

button.

 

 

Precondition: ‘Please select product:’ is displayed.

 

 

T Place a cup under the coffee spout.

 

 

 

 

 

 

TPress the ‘Coffee’ button.

 

 

Preparation starts. The preset amount of water for coffee

 

 

flows into the cup.

 

 

Preparation stops automatically. ‘Please select product:’

 

 

appears on the display.

 

 

 

Preparing two specialty Two ristretti, two espressi or two coffees can always be prepared

coffeesfollowing the same model: Press the preparation button you want twice within two seconds or select the desired double product in the product selector.

Preparation in ‘coffee à la carte’ mode

Briefly press the Rotary Switch once to enter ‘coffee à la carte’ mode. In this mode you can select the coffee strength and amounts before preparation.

EThe settings made in ‘coffee à la carte’ mode are temporary settings and are not stored.

EThe machine will exit ‘coffee à la carte’ mode automatically after 5 seconds if no preparation is started.

EYou cannot prepare two products at one time in ‘coffee à la carte’ mode.

Example: Proceed as follows to prepare an espresso in ‘coffee à la carte’ mode.

Precondition: ‘Please select product:’ is displayed. T Place a cup under the coffee spout.

kT Briefly press the Rotary Switch to enter ‘coffee à la carte’ mode.

‘Café à la carte’

The products you can prepare in this mode are displayed.

EYou can also select the products in the product selector. To do this, turn the Rotary Switch to view the product selector.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Impressa Z9 One Touch TFT Instructions for Use Preparation Control elements Preparing and using for the first timePermanent settings in programming mode Your Impressa Z9 One Touch TFTMaintenance Symbol descriptionImportant Safeguards Special power cord set instructions Important Safeguards Never do or you will void your warranty protection Control elements Button programming Top of the machine Front On/Off button Display Rotary SwitchFilling the bean container Preparing and using for the first timeSetting up the machine Jura on the InternetPreparing and using for the first time ‘Machine is heating.’ ‘Filter rinsing complete’Press the Rotary Switch Turn the Rotary Switch to change the water hardnessOnly fill the water tank with fresh, cold water Determining the water Adjusting the grinderHardness Filling the water tank Connecting milkPreparing and using for the first time Ways of preparing a beverage Preparation‘Cappuccino’ ‘1 portion milk’ Espresso and coffee Preparation in ‘coffee à la carte’ mode‘Café à la carte’ Latte macchiato Special coffeeCappuccino Foam Warm milk and milkTPress the ‘Latte macchiato’ button ‘Please add ground coffee.’ Ground coffee‘Please select product’ ‘Please select product’ appears on the display Permanently settingHold the ‘Coffee’ button down until ‘Enough coffee? Press Button.’ appears‘Normal’, ‘X high’, ‘Low’ Hot waterDaily operation Switching on Daily maintenanceUnder the cappuccino frother Switching offYour Impressa is switched off Place one receptacle under the coffee spout and anotherPermanent settings in programming mode Product settings To ‘40 sec.’ ‘X high’ Volume ‘0.5 oz’ ‘15.0 oz’ ‘Normal’‘Maintenance status 1/7’ TPress the ‘Programming’ button. ‘Programming’TPress the ‘Add to favourites’ button. ‘Select position’ TPress the ‘Classic-library’ button. ‘Classic-library’Press the button at the bottom right Renaming a product Energy-saving modeAutomatic switch-off TPress the ‘Choose language’ button. ‘Choose language’ Turn the Rotary Switch until the program item ‘MachineProgramming mode. Use the Rotary Switch g to select LanguageRinses TPress the ‘Water hardness’ button. ‘Water hardness’ Setting the water‘Maintenance settings 6/7’ ‘Rinse the milk system’ / ‘Automatic’Unit for amount of water Display settingsSettings 5/7’ is displayed ‘Machine settings 5/7’TPress the ‘Product counter’ button. ‘Product counter’ TPress the ‘Colour scheme’ button. ‘Colour scheme’Rinsing the machine ‘Rinse the coffee system’ MaintenanceFrother Cleaning the cappuccino frotherRinsing the machine Rinsing the cappuccinoTPress the ‘Start’ button Keep children Away Avoid contact with skin and eyesDismantling and rinsing the cappuccino frother Inserting and activating the filterReassemble the cappuccino frother TPress the ‘Filter’ button. ‘Use filter’ Changing the filter ‘Use only original Jura maintenance products!’ Cleaning the machineMaintenance ‘Approximate duration 45 min.’ Descaling the machineRemove the water tank and rinse it thoroughly Firmly attach the frother to the connectorSpout and the hot-water spout Press the Rotary Switch ‘Fill water tank.’Tank thoroughly Cleaning the beanContainer Them back into the machineDisplay messages Machine.’ or ‘Clean machineNow.’ ‘DecalcifyTroubleshooting ‘Empty drip tray.’ is Other ‘ERROR’‘Fill water tank.’ is System TPress the ‘Factory setting’ button. ‘Factory setting’Transport and environmentally friendly disposal Transport / Emptying31  37  45 cm Technical dataInserting and activating the filter 41 First-time use IndexQuerying information Preparation options 17 ProblemsWater tank 8 Descaling 48 Filling Website Intentionally blank Intentionally blank Jura contact details/ Legal information

Z9 specifications

The Jura Capresso Z9 is a remarkable fully automatic espresso machine that brings the café experience into the comfort of your home. One of its standout features is the patented Pulse Extraction Process (P.E.P.), which optimizes the extraction time of espresso by utilizing short bursts of water. This process allows for greater flavor extraction, ensuring that each shot of espresso is rich and aromatic.

With a sleek and elegant design, the Z9 boasts an intuitive TFT color display that simplifies navigation through its numerous options. Users can easily program their desired coffee strength, temperature, and volume, catering to personal preferences. The machine is equipped with the versatile One-Touch feature, enabling coffee enthusiasts to create a variety of specialty drinks, from espresso and cappuccino to latte macchiato, all at the touch of a button.

Another significant characteristic of the Jura Z9 is its integrated coffee grinder, featuring professional-grade conical burrs. This ensures that the coffee grounds are uniformly sized, leading to an optimal brewing process. The grinder offers several settings, allowing users to select their preferred grind size for the perfect cup of coffee. Moreover, the machine’s dual coffee spouts can be adjusted to accommodate various cup sizes, making it convenient for serving drinks in both small and large containers.

The Z9 also prioritizes convenience with its automatic self-cleaning program. This feature minimizes the time spent on maintenance, allowing users to enjoy their coffee without worrying about upkeep. The machine's intelligent water system (I.W.S.) utilizes RFID technology to monitor the status of the water filter, prompting users when it needs replacement for optimal taste and performance.

In terms of design, the Jura Z9 is compact and modern, featuring a high-quality stainless steel and ABS plastic body that is both functional and stylish. The water reservoir is generously sized, reducing the frequency of refills and enhancing the overall user experience.

In conclusion, the Jura Capresso Z9 stands out as a top-tier choice for coffee enthusiasts seeking a high-quality, convenient, and stylish espresso machine. With its innovative technologies, user-friendly features, and sleek design, it delivers café-quality beverages that satisfy even the most discerning palates.
Top Page Image Contents