Jura Capresso Z9 manual Rinsing the machine, Rinsing the cappuccino, Frother

Page 39

 

 

 

5 Maintenance

Rinsing the machine

You can initiate the rinse operation manually at any time.

 

 

 

Precondition: ‘Please select product:’ is displayed.

 

 

 

T Place a receptacle under the coffee spout.

 

 

 

 

 

 

 

 

 

O T Press the P button.

 

 

 

‘Maintenance status (1/7)’

 

 

 

g T Turn the Rotary Switch until the program item ‘Maintenance

 

 

 

status (2/7)’ is displayed.

 

 

 

TPress the ‘Rinse the coffee system’ button.

 

 

 

‘Machine is rinsing.’, water flows out of the coffee spout.

 

 

 

The rinse stops automatically. ‘Please select product:’

 

 

 

appears on the display.

Rinsing the cappuccino

After each milk preparation, the IMPRESSA prompts you to rinse the

frother

milk system.

 

 

 

Precondition: ‘Rinse the milk system.’ is displayed and the Rotary

 

 

 

Switch lights up.

 

 

 

T Place a receptacle under the cappuccino frother.

 

 

 

 

 

 

 

 

 

k T Press the Rotary Switch.

 

 

 

‘Milk system is being rinsed.’, the cappuccino frother is

 

 

 

rinsed.

 

 

 

The rinse stops automatically. ‘Please select product:’

 

 

 

appears on the display.

 

 

 

 

Cleaning the cappuccino frother

J WARNING

To ensure that the cappuccino frother always works properly, you must clean it daily when you have been preparing milk. Your IMPRESSA will not prompt you to clean the cappuccino frother.

Non-recommended cleaning agents will not optimally remove milk residues. This may cause the cappuccino frother to become blocked and fly off the machine. Discharge of hot steam.

TUse only original JURA milk system cleaner.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Impressa Z9 One Touch TFT Instructions for Use Preparation Control elements Preparing and using for the first timePermanent settings in programming mode Your Impressa Z9 One Touch TFTMaintenance Symbol descriptionImportant Safeguards Special power cord set instructions Important Safeguards Never do or you will void your warranty protection Control elements Button programming Top of the machine Front On/Off button Display Rotary SwitchFilling the bean container Preparing and using for the first timeSetting up the machine Jura on the InternetPreparing and using for the first time ‘Machine is heating.’ ‘Filter rinsing complete’Turn the Rotary Switch to change the water hardness Press the Rotary SwitchOnly fill the water tank with fresh, cold water Adjusting the grinder Determining the waterHardness Filling the water tank Connecting milkPreparing and using for the first time Preparation Ways of preparing a beverage‘Cappuccino’ ‘1 portion milk’ Preparation in ‘coffee à la carte’ mode Espresso and coffee‘Café à la carte’ Special coffee Latte macchiatoCappuccino Warm milk and milk FoamTPress the ‘Latte macchiato’ button Ground coffee ‘Please add ground coffee.’‘Please select product’ ‘Please select product’ appears on the display Permanently settingHold the ‘Coffee’ button down until ‘Enough coffee? Press Button.’ appears‘Normal’, ‘X high’, ‘Low’ Hot waterDaily operation Switching on Daily maintenanceUnder the cappuccino frother Switching offYour Impressa is switched off Place one receptacle under the coffee spout and anotherPermanent settings in programming mode Product settings To ‘40 sec.’ ‘X high’ Volume ‘0.5 oz’ ‘15.0 oz’ ‘Normal’‘Maintenance status 1/7’ TPress the ‘Programming’ button. ‘Programming’TPress the ‘Classic-library’ button. ‘Classic-library’ TPress the ‘Add to favourites’ button. ‘Select position’Press the button at the bottom right Renaming a product Energy-saving modeAutomatic switch-off TPress the ‘Choose language’ button. ‘Choose language’ Turn the Rotary Switch until the program item ‘MachineProgramming mode. Use the Rotary Switch g to select LanguageRinses TPress the ‘Water hardness’ button. ‘Water hardness’ Setting the water‘Maintenance settings 6/7’ ‘Rinse the milk system’ / ‘Automatic’Unit for amount of water Display settingsSettings 5/7’ is displayed ‘Machine settings 5/7’TPress the ‘Product counter’ button. ‘Product counter’ TPress the ‘Colour scheme’ button. ‘Colour scheme’Rinsing the machine ‘Rinse the coffee system’ MaintenanceFrother Cleaning the cappuccino frotherRinsing the machine Rinsing the cappuccinoTPress the ‘Start’ button Keep children Away Avoid contact with skin and eyesInserting and activating the filter Dismantling and rinsing the cappuccino frotherReassemble the cappuccino frother TPress the ‘Filter’ button. ‘Use filter’ Changing the filter ‘Use only original Jura maintenance products!’ Cleaning the machineMaintenance ‘Approximate duration 45 min.’ Descaling the machineRemove the water tank and rinse it thoroughly Firmly attach the frother to the connectorSpout and the hot-water spout Press the Rotary Switch ‘Fill water tank.’Tank thoroughly Cleaning the beanContainer Them back into the machineDisplay messages Machine.’ or ‘Clean machineNow.’ ‘DecalcifyTroubleshooting Other ‘ERROR’ ‘Empty drip tray.’ is‘Fill water tank.’ is System TPress the ‘Factory setting’ button. ‘Factory setting’Transport and environmentally friendly disposal Transport / Emptying31  37  45 cm Technical dataInserting and activating the filter 41 First-time use IndexQuerying information Preparation options 17 ProblemsWater tank 8 Descaling 48 Filling Website Intentionally blank Intentionally blank Jura contact details/ Legal information

Z9 specifications

The Jura Capresso Z9 is a remarkable fully automatic espresso machine that brings the café experience into the comfort of your home. One of its standout features is the patented Pulse Extraction Process (P.E.P.), which optimizes the extraction time of espresso by utilizing short bursts of water. This process allows for greater flavor extraction, ensuring that each shot of espresso is rich and aromatic.

With a sleek and elegant design, the Z9 boasts an intuitive TFT color display that simplifies navigation through its numerous options. Users can easily program their desired coffee strength, temperature, and volume, catering to personal preferences. The machine is equipped with the versatile One-Touch feature, enabling coffee enthusiasts to create a variety of specialty drinks, from espresso and cappuccino to latte macchiato, all at the touch of a button.

Another significant characteristic of the Jura Z9 is its integrated coffee grinder, featuring professional-grade conical burrs. This ensures that the coffee grounds are uniformly sized, leading to an optimal brewing process. The grinder offers several settings, allowing users to select their preferred grind size for the perfect cup of coffee. Moreover, the machine’s dual coffee spouts can be adjusted to accommodate various cup sizes, making it convenient for serving drinks in both small and large containers.

The Z9 also prioritizes convenience with its automatic self-cleaning program. This feature minimizes the time spent on maintenance, allowing users to enjoy their coffee without worrying about upkeep. The machine's intelligent water system (I.W.S.) utilizes RFID technology to monitor the status of the water filter, prompting users when it needs replacement for optimal taste and performance.

In terms of design, the Jura Z9 is compact and modern, featuring a high-quality stainless steel and ABS plastic body that is both functional and stylish. The water reservoir is generously sized, reducing the frequency of refills and enhancing the overall user experience.

In conclusion, the Jura Capresso Z9 stands out as a top-tier choice for coffee enthusiasts seeking a high-quality, convenient, and stylish espresso machine. With its innovative technologies, user-friendly features, and sleek design, it delivers café-quality beverages that satisfy even the most discerning palates.
Top Page Image Contents