Jura Capresso Z9 manual Product settings

Page 28

4Permanent settings in programming mode

Program item

Sub-item

Explanation

‘Maintenance

‘Filter’,

T Indicate whether you are operating your

settings (6/7)’

‘Water hardness’ (only if

IMPRESSA with or without a CLEARYL Blue filter

 

filter is not activated),

cartridge.

 

‘Switch-on rinse’,

T Adjust the water hardness.

 

‘Rinse the milk system’

T Change the settings for the switch-on rinse

 

 

and milk system rinse.

‘Information (7/7)’ ‘Product counter’, ‘Maintenance counter’, ‘Version’

T Keep track of all products prepared and view the number of maintenance programs performed.

Product settings

JWARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking.

T In the event of scalding, rinse affected area with cold water an seek medical attention.

T Keep children AWAY.

In the program item ‘Product settings (3/7)’ / ‘Programming’ you can make individual settings for all specialty coffees, milk and hot water. The following permanent settings can be made:

Product

Temperature

Coffee strength

Amount

Ristretto,

‘High’,

; (extra-mild),

Volume: ‘0.5 oz’ – ‘8.0 oz’

espresso,

‘Normal’,

;; (mild),

(25 ml – 240 ml)

coffee,

‘Low’

;;; (normal),

 

special coffee

 

;;;; (strong),

 

 

 

;;;;; (extra-strong)

 

 

 

 

 

Two ristretti,

‘High’,

–

Volume: ‘0.5 oz’ – ‘8.0 oz’

two espressi,

‘Normal’,

 

(25 ml – 240 ml) (per cup)

two coffees

‘Low’

 

 

 

 

 

 

Latte macchiato,

‘High’,

; (extra-mild),

Amount of milk:

cappuccino

‘Normal’,

;; (mild),

‘3 sec.’ – ‘120 sec.’

 

‘Low’

;;; (normal),

Interval: ‘0 sec.’ – ‘120 sec.’

 

 

;;;; (strong),

Volume: ‘0.5 oz’ – ‘8.0 oz’

 

 

;;;;; (extra-strong)

(25 ml – 240 ml)

 

 

 

 

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Impressa Z9 One Touch TFT Instructions for Use Control elements Preparing and using for the first time Permanent settings in programming modeYour Impressa Z9 One Touch TFT PreparationSymbol description MaintenanceImportant Safeguards Special power cord set instructions Important Safeguards Never do or you will void your warranty protection Control elements Top of the machine Front On/Off button Display Rotary Switch Button programmingPreparing and using for the first time Setting up the machineJura on the Internet Filling the bean containerPreparing and using for the first time ‘Filter rinsing complete’ ‘Machine is heating.’Press the Rotary Switch Turn the Rotary Switch to change the water hardnessOnly fill the water tank with fresh, cold water Determining the water Adjusting the grinderHardness Connecting milk Filling the water tankPreparing and using for the first time Ways of preparing a beverage Preparation‘Cappuccino’ ‘1 portion milk’ Espresso and coffee Preparation in ‘coffee à la carte’ mode‘Café à la carte’ Latte macchiato Special coffeeCappuccino Foam Warm milk and milkTPress the ‘Latte macchiato’ button ‘Please add ground coffee.’ Ground coffee‘Please select product’ Permanently setting Hold the ‘Coffee’ button down until ‘Enough coffee? PressButton.’ appears ‘Please select product’ appears on the displayHot water ‘Normal’, ‘X high’, ‘Low’Switching on Daily maintenance Daily operationSwitching off Your Impressa is switched offPlace one receptacle under the coffee spout and another Under the cappuccino frotherPermanent settings in programming mode Product settings ‘X high’ Volume ‘0.5 oz’ ‘15.0 oz’ ‘Normal’ ‘Maintenance status 1/7’TPress the ‘Programming’ button. ‘Programming’ To ‘40 sec.’TPress the ‘Add to favourites’ button. ‘Select position’ TPress the ‘Classic-library’ button. ‘Classic-library’Press the button at the bottom right Energy-saving mode Renaming a productAutomatic switch-off Turn the Rotary Switch until the program item ‘Machine Programming mode. Use the Rotary Switch g to selectLanguage TPress the ‘Choose language’ button. ‘Choose language’Rinses Setting the water ‘Maintenance settings 6/7’‘Rinse the milk system’ / ‘Automatic’ TPress the ‘Water hardness’ button. ‘Water hardness’Display settings Settings 5/7’ is displayed‘Machine settings 5/7’ Unit for amount of waterTPress the ‘Colour scheme’ button. ‘Colour scheme’ TPress the ‘Product counter’ button. ‘Product counter’Maintenance Rinsing the machine ‘Rinse the coffee system’Cleaning the cappuccino frother Rinsing the machineRinsing the cappuccino FrotherKeep children Away Avoid contact with skin and eyes TPress the ‘Start’ buttonDismantling and rinsing the cappuccino frother Inserting and activating the filterReassemble the cappuccino frother TPress the ‘Filter’ button. ‘Use filter’ Changing the filter Cleaning the machine ‘Use only original Jura maintenance products!’Maintenance Descaling the machine ‘Approximate duration 45 min.’Firmly attach the frother to the connector Spout and the hot-water spout Press the Rotary Switch‘Fill water tank.’ Remove the water tank and rinse it thoroughlyCleaning the bean ContainerThem back into the machine Tank thoroughlyDisplay messages ‘Clean machine Now.’‘Decalcify Machine.’ orTroubleshooting ‘Empty drip tray.’ is Other ‘ERROR’‘Fill water tank.’ is TPress the ‘Factory setting’ button. ‘Factory setting’ Transport and environmentally friendly disposalTransport / Emptying SystemTechnical data 31  37  45 cmIndex Inserting and activating the filter 41 First-time usePreparation options 17 Problems Querying informationWater tank 8 Descaling 48 Filling Website Intentionally blank Intentionally blank Jura contact details/ Legal information

Z9 specifications

The Jura Capresso Z9 is a remarkable fully automatic espresso machine that brings the café experience into the comfort of your home. One of its standout features is the patented Pulse Extraction Process (P.E.P.), which optimizes the extraction time of espresso by utilizing short bursts of water. This process allows for greater flavor extraction, ensuring that each shot of espresso is rich and aromatic.

With a sleek and elegant design, the Z9 boasts an intuitive TFT color display that simplifies navigation through its numerous options. Users can easily program their desired coffee strength, temperature, and volume, catering to personal preferences. The machine is equipped with the versatile One-Touch feature, enabling coffee enthusiasts to create a variety of specialty drinks, from espresso and cappuccino to latte macchiato, all at the touch of a button.

Another significant characteristic of the Jura Z9 is its integrated coffee grinder, featuring professional-grade conical burrs. This ensures that the coffee grounds are uniformly sized, leading to an optimal brewing process. The grinder offers several settings, allowing users to select their preferred grind size for the perfect cup of coffee. Moreover, the machine’s dual coffee spouts can be adjusted to accommodate various cup sizes, making it convenient for serving drinks in both small and large containers.

The Z9 also prioritizes convenience with its automatic self-cleaning program. This feature minimizes the time spent on maintenance, allowing users to enjoy their coffee without worrying about upkeep. The machine's intelligent water system (I.W.S.) utilizes RFID technology to monitor the status of the water filter, prompting users when it needs replacement for optimal taste and performance.

In terms of design, the Jura Z9 is compact and modern, featuring a high-quality stainless steel and ABS plastic body that is both functional and stylish. The water reservoir is generously sized, reducing the frequency of refills and enhancing the overall user experience.

In conclusion, the Jura Capresso Z9 stands out as a top-tier choice for coffee enthusiasts seeking a high-quality, convenient, and stylish espresso machine. With its innovative technologies, user-friendly features, and sleek design, it delivers café-quality beverages that satisfy even the most discerning palates.
Top Page Image Contents