Jura Capresso Z9 manual Inserting and activating the filter, Reassemble the cappuccino frother

Page 41

Dismantling and rinsing the cappuccino frother

Inserting and activating the filter

5 Maintenance

T Empty the other receptacle and place it under the cappuccino frother again.

TPress the ‘Next’ button.

‘Milk system is being cleaned.’, the cappuccino frother and the milk pipe are rinsed with fresh water.

The operation stops automatically. ‘Please select product:’ appears on the display.

To make sure the cappuccino frother works properly, and in the interests of hygiene, it must be dismantled and rinsed daily if you have been preparing milk. Your IMPRESSA will not prompt you to dismantle and rinse the frother.

TRemove the milk pipe and rinse it thoroughly under running water.

TCarefully pull the cappuccino frother down and off.

TDismantle the cappuccino frother into its individual parts.

TRinse all parts of the cappuccino frother thoroughly under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in JURA milk system cleaner and then rinse them thoroughly.

TReassemble the cappuccino frother.

EEnsure that all individual parts are correctly and firmly con- nected to ensure correct operation of the cappuccino frother.

T Firmly attach the frother to the connector.

Your IMPRESSA no longer has to be descaled if you are using the CLEARYL Blue filter cartridge. If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.

EPerform the ‘inserting the filter’ operation without any interruptions. This will ensure that your IMPRESSA always produces its best.

Precondition: ‘Please select product:’ is displayed.

OT Press the P button.

‘Maintenance status (1/7)’

gT Turn the Rotary Switch until the program item ‘Maintenance settings (6/7)’ is displayed.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Impressa Z9 One Touch TFT Instructions for Use Permanent settings in programming mode Control elements Preparing and using for the first timeYour Impressa Z9 One Touch TFT PreparationMaintenance Symbol descriptionImportant Safeguards Special power cord set instructions Important Safeguards Never do or you will void your warranty protection Control elements Button programming Top of the machine Front On/Off button Display Rotary SwitchSetting up the machine Preparing and using for the first timeJura on the Internet Filling the bean containerPreparing and using for the first time ‘Machine is heating.’ ‘Filter rinsing complete’Only fill the water tank with fresh, cold water Turn the Rotary Switch to change the water hardnessPress the Rotary Switch Hardness Adjusting the grinderDetermining the water Filling the water tank Connecting milkPreparing and using for the first time ‘Cappuccino’ PreparationWays of preparing a beverage ‘1 portion milk’ ‘Café à la carte’ Preparation in ‘coffee à la carte’ modeEspresso and coffee Cappuccino Special coffeeLatte macchiato TPress the ‘Latte macchiato’ button Warm milk and milkFoam ‘Please select product’ Ground coffee‘Please add ground coffee.’ Hold the ‘Coffee’ button down until ‘Enough coffee? Press Permanently settingButton.’ appears ‘Please select product’ appears on the display‘Normal’, ‘X high’, ‘Low’ Hot waterDaily operation Switching on Daily maintenanceYour Impressa is switched off Switching offPlace one receptacle under the coffee spout and another Under the cappuccino frotherPermanent settings in programming mode Product settings ‘Maintenance status 1/7’ ‘X high’ Volume ‘0.5 oz’ ‘15.0 oz’ ‘Normal’TPress the ‘Programming’ button. ‘Programming’ To ‘40 sec.’Press the button at the bottom right TPress the ‘Classic-library’ button. ‘Classic-library’TPress the ‘Add to favourites’ button. ‘Select position’ Renaming a product Energy-saving modeAutomatic switch-off Programming mode. Use the Rotary Switch g to select Turn the Rotary Switch until the program item ‘MachineLanguage TPress the ‘Choose language’ button. ‘Choose language’Rinses ‘Maintenance settings 6/7’ Setting the water‘Rinse the milk system’ / ‘Automatic’ TPress the ‘Water hardness’ button. ‘Water hardness’Settings 5/7’ is displayed Display settings‘Machine settings 5/7’ Unit for amount of waterTPress the ‘Product counter’ button. ‘Product counter’ TPress the ‘Colour scheme’ button. ‘Colour scheme’Rinsing the machine ‘Rinse the coffee system’ MaintenanceRinsing the machine Cleaning the cappuccino frotherRinsing the cappuccino FrotherTPress the ‘Start’ button Keep children Away Avoid contact with skin and eyesReassemble the cappuccino frother Inserting and activating the filterDismantling and rinsing the cappuccino frother TPress the ‘Filter’ button. ‘Use filter’ Changing the filter ‘Use only original Jura maintenance products!’ Cleaning the machineMaintenance ‘Approximate duration 45 min.’ Descaling the machineSpout and the hot-water spout Press the Rotary Switch Firmly attach the frother to the connector‘Fill water tank.’ Remove the water tank and rinse it thoroughlyContainer Cleaning the beanThem back into the machine Tank thoroughlyDisplay messages Now.’ ‘Clean machine‘Decalcify Machine.’ orTroubleshooting ‘Fill water tank.’ is Other ‘ERROR’‘Empty drip tray.’ is Transport and environmentally friendly disposal TPress the ‘Factory setting’ button. ‘Factory setting’Transport / Emptying System31  37  45 cm Technical dataInserting and activating the filter 41 First-time use IndexQuerying information Preparation options 17 ProblemsWater tank 8 Descaling 48 Filling Website Intentionally blank Intentionally blank Jura contact details/ Legal information

Z9 specifications

The Jura Capresso Z9 is a remarkable fully automatic espresso machine that brings the café experience into the comfort of your home. One of its standout features is the patented Pulse Extraction Process (P.E.P.), which optimizes the extraction time of espresso by utilizing short bursts of water. This process allows for greater flavor extraction, ensuring that each shot of espresso is rich and aromatic.

With a sleek and elegant design, the Z9 boasts an intuitive TFT color display that simplifies navigation through its numerous options. Users can easily program their desired coffee strength, temperature, and volume, catering to personal preferences. The machine is equipped with the versatile One-Touch feature, enabling coffee enthusiasts to create a variety of specialty drinks, from espresso and cappuccino to latte macchiato, all at the touch of a button.

Another significant characteristic of the Jura Z9 is its integrated coffee grinder, featuring professional-grade conical burrs. This ensures that the coffee grounds are uniformly sized, leading to an optimal brewing process. The grinder offers several settings, allowing users to select their preferred grind size for the perfect cup of coffee. Moreover, the machine’s dual coffee spouts can be adjusted to accommodate various cup sizes, making it convenient for serving drinks in both small and large containers.

The Z9 also prioritizes convenience with its automatic self-cleaning program. This feature minimizes the time spent on maintenance, allowing users to enjoy their coffee without worrying about upkeep. The machine's intelligent water system (I.W.S.) utilizes RFID technology to monitor the status of the water filter, prompting users when it needs replacement for optimal taste and performance.

In terms of design, the Jura Z9 is compact and modern, featuring a high-quality stainless steel and ABS plastic body that is both functional and stylish. The water reservoir is generously sized, reducing the frequency of refills and enhancing the overall user experience.

In conclusion, the Jura Capresso Z9 stands out as a top-tier choice for coffee enthusiasts seeking a high-quality, convenient, and stylish espresso machine. With its innovative technologies, user-friendly features, and sleek design, it delivers café-quality beverages that satisfy even the most discerning palates.
Top Page Image Contents