Jura Capresso Z9 manual Hot water, ‘Normal’, ‘X high’, ‘Low’

Page 24

2 Preparation

 

 

 

Hot water

 

 

The following temperatures can be selected for preparing hot water:

 

 

 

 

‘Normal’, ‘X high’, ‘Low’.

 

 

 

 

 

 

 

J CAUTION There is a danger of scalding from hot water splashes.

 

 

 

 

T Avoid direct contact with the skin.

 

 

 

 

 

 

 

 

 

Example: Proceed as follows to prepare hot water.

 

 

 

 

Precondition: ‘Please select product:’ is displayed.

 

 

 

 

T Place a cup under the hot-water spout.

 

 

 

 

 

 

 

 

 

 

 

 

TPress the ‘Hot water’ button.

 

 

 

 

‘Hot water’ and the temperature are displayed.

 

 

 

 

E By pressing the Rotary Switch g (within approximately

 

 

 

 

2 seconds) you can set the temperature to your individual

 

 

 

 

preference. This setting is not saved.

 

 

 

 

The preset amount of water flows into the cup.

 

 

 

 

 

 

 

 

Preparation stops automatically. ‘Please select product:’

 

 

 

 

appears on the display.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Impressa Z9 One Touch TFT Instructions for Use Control elements Preparing and using for the first time Permanent settings in programming modeYour Impressa Z9 One Touch TFT PreparationSymbol description MaintenanceImportant Safeguards Special power cord set instructions Important Safeguards Never do or you will void your warranty protection Control elements Top of the machine Front On/Off button Display Rotary Switch Button programmingPreparing and using for the first time Setting up the machineJura on the Internet Filling the bean containerPreparing and using for the first time ‘Filter rinsing complete’ ‘Machine is heating.’Turn the Rotary Switch to change the water hardness Press the Rotary SwitchOnly fill the water tank with fresh, cold water Adjusting the grinder Determining the waterHardness Connecting milk Filling the water tankPreparing and using for the first time Preparation Ways of preparing a beverage‘Cappuccino’ ‘1 portion milk’ Preparation in ‘coffee à la carte’ mode Espresso and coffee‘Café à la carte’ Special coffee Latte macchiatoCappuccino Warm milk and milk FoamTPress the ‘Latte macchiato’ button Ground coffee ‘Please add ground coffee.’‘Please select product’ Permanently setting Hold the ‘Coffee’ button down until ‘Enough coffee? PressButton.’ appears ‘Please select product’ appears on the displayHot water ‘Normal’, ‘X high’, ‘Low’Switching on Daily maintenance Daily operationSwitching off Your Impressa is switched offPlace one receptacle under the coffee spout and another Under the cappuccino frotherPermanent settings in programming mode Product settings ‘X high’ Volume ‘0.5 oz’ ‘15.0 oz’ ‘Normal’ ‘Maintenance status 1/7’TPress the ‘Programming’ button. ‘Programming’ To ‘40 sec.’TPress the ‘Classic-library’ button. ‘Classic-library’ TPress the ‘Add to favourites’ button. ‘Select position’Press the button at the bottom right Energy-saving mode Renaming a productAutomatic switch-off Turn the Rotary Switch until the program item ‘Machine Programming mode. Use the Rotary Switch g to selectLanguage TPress the ‘Choose language’ button. ‘Choose language’Rinses Setting the water ‘Maintenance settings 6/7’‘Rinse the milk system’ / ‘Automatic’ TPress the ‘Water hardness’ button. ‘Water hardness’Display settings Settings 5/7’ is displayed‘Machine settings 5/7’ Unit for amount of waterTPress the ‘Colour scheme’ button. ‘Colour scheme’ TPress the ‘Product counter’ button. ‘Product counter’Maintenance Rinsing the machine ‘Rinse the coffee system’Cleaning the cappuccino frother Rinsing the machineRinsing the cappuccino FrotherKeep children Away Avoid contact with skin and eyes TPress the ‘Start’ buttonInserting and activating the filter Dismantling and rinsing the cappuccino frotherReassemble the cappuccino frother TPress the ‘Filter’ button. ‘Use filter’ Changing the filter Cleaning the machine ‘Use only original Jura maintenance products!’Maintenance Descaling the machine ‘Approximate duration 45 min.’Firmly attach the frother to the connector Spout and the hot-water spout Press the Rotary Switch‘Fill water tank.’ Remove the water tank and rinse it thoroughlyCleaning the bean ContainerThem back into the machine Tank thoroughlyDisplay messages ‘Clean machine Now.’‘Decalcify Machine.’ orTroubleshooting Other ‘ERROR’ ‘Empty drip tray.’ is‘Fill water tank.’ is TPress the ‘Factory setting’ button. ‘Factory setting’ Transport and environmentally friendly disposalTransport / Emptying SystemTechnical data 31  37  45 cmIndex Inserting and activating the filter 41 First-time usePreparation options 17 Problems Querying informationWater tank 8 Descaling 48 Filling Website Intentionally blank Intentionally blank Jura contact details/ Legal information

Z9 specifications

The Jura Capresso Z9 is a remarkable fully automatic espresso machine that brings the café experience into the comfort of your home. One of its standout features is the patented Pulse Extraction Process (P.E.P.), which optimizes the extraction time of espresso by utilizing short bursts of water. This process allows for greater flavor extraction, ensuring that each shot of espresso is rich and aromatic.

With a sleek and elegant design, the Z9 boasts an intuitive TFT color display that simplifies navigation through its numerous options. Users can easily program their desired coffee strength, temperature, and volume, catering to personal preferences. The machine is equipped with the versatile One-Touch feature, enabling coffee enthusiasts to create a variety of specialty drinks, from espresso and cappuccino to latte macchiato, all at the touch of a button.

Another significant characteristic of the Jura Z9 is its integrated coffee grinder, featuring professional-grade conical burrs. This ensures that the coffee grounds are uniformly sized, leading to an optimal brewing process. The grinder offers several settings, allowing users to select their preferred grind size for the perfect cup of coffee. Moreover, the machine’s dual coffee spouts can be adjusted to accommodate various cup sizes, making it convenient for serving drinks in both small and large containers.

The Z9 also prioritizes convenience with its automatic self-cleaning program. This feature minimizes the time spent on maintenance, allowing users to enjoy their coffee without worrying about upkeep. The machine's intelligent water system (I.W.S.) utilizes RFID technology to monitor the status of the water filter, prompting users when it needs replacement for optimal taste and performance.

In terms of design, the Jura Z9 is compact and modern, featuring a high-quality stainless steel and ABS plastic body that is both functional and stylish. The water reservoir is generously sized, reducing the frequency of refills and enhancing the overall user experience.

In conclusion, the Jura Capresso Z9 stands out as a top-tier choice for coffee enthusiasts seeking a high-quality, convenient, and stylish espresso machine. With its innovative technologies, user-friendly features, and sleek design, it delivers café-quality beverages that satisfy even the most discerning palates.
Top Page Image Contents