Jura Capresso 68193 Tray Missing, Fill Beans, Coffee Ready / Clean Machine, Not Enough PRE-GROUND

Page 30

can resume brewing coffee.

Make sure the Dual Coffee Spouts are moved upwards. Carefully lift and pull out the removable drawer (Fig. 18 and 19). TRAY MISSING. There is water in the drawer. Empty the drawer and the used coffee container, assemble and replace. Make sure the two metal contacts of the drawer are clean and dry.

Please note: If the machine is not used for a few days, pull out the tray and empty the used coffee container. Used, moist coffee grounds can develop mold and mildew.

Important: If you pull out the drawer without any corresponding message in the display you must empty the used coffee container. The machine assumes that it will be emptied. If you do not empty the container, used coffee will overflow inside the machine and cause serious damage to the coffee release mechanism.

Please note: The machine does not sense if the used coffee container (Fig. 1,16) is inserted. If the used coffee container is not inserted, ground coffee discharges onto the drawer.

TRAY MISSING

Insert the drawer with the empty used coffee container. Make sure the metal contacts in the back of the drawer are clean and dry.

FILL BEANS

Add beans to the bean container.

COFFEE READY / CLEAN MACHINE

After approx. 220 coffee brewings or 80 initial rinsing cycles you must run a tablet cleaning cycle. You can still make coffee, how- ever we highly recommend to perform the cleaning cycle within the next few days (chapter 16.1).

COFFEE READY / CLEAN NOW

After 30 more coffee brewings the message reads CLEAN NOW.

COFFEE READY / DECALCIFY MACHINE

It is time to decalcify the machine. You can still make coffee, however we highly recommend to perform the decalcifying cycle within the next few days (chapter 17.1).

Please note: If you use the Clearyl cartridge and the message appears, then your cartridge function was not activated. Follow the instruction in chapter 13a to program and activate the cartridge. If the cartridge is already in use for several weeks install a new cartridge.

COFFEE READY / DECALCIFY NOW It is urgent to decalcify the machine.

COFFEE READY / CHANGE FILTER

It is time to replace the Clearyl filter (chapter 13b).

NOT ENOUGH PRE-GROUND

Not enough pre-ground coffee was filled into the ground coffee funnel (Fig. 1,11). The S9 OT stops the operation (chapter 9e).

15.1 MANUAL MAINTENANCE CYCLES

The S9 OT will display when it’s time to perform certain cleaning programs. You can also manually access these programs and perform them.

COFFEE READY.

Push the Rotary Dial until the display shows MAINTENANCE.

Push the Dial again, CLEAN CAPPUCCINO.

Turning the dial shows you which programs you can access: CLEAN CAPPUCCINO (chapter 15.5)

RINSE MACHINE (see example below in chapter 15.1) RINSE CAPPUCCINO (chapter 10g)

CLEAN MACHINE (chapter 16.1) DECALCIFY MACHINE (chapter 17.1) CHANGE FILTER (chapter 13c)

30.

Image 30
Contents Impressa S9 Important Safeguards Customer Service Jura-CapressoHeight-Adjustable Dual Coffee Spout Ground Coffee Button Service CoverLa Carte Button CUP Espresso ButtonExtension rod Frothing range Page Table of Contents Table of Contents Important / Battery BACK-UP Welcome to the Impressa S9 One TouchHigh Pressure Brewing PLEASE, DON’T... or you void your warranty protection3a. BEAN-TO-CUP / Crema Coffee 3b. Different Coffee DrinksFactory Settings / Options PLEASE, doXMILD, MILD, NORMAL, STRONG, Xstrong Preparing the Machine for the First Time Factory Settings for Beverage ButtonsOther Factory Settings 6a. Filling the Water TankCoffee Ready Adjusting the Grinder6c. Turning the Machine on for the First Time 6d. CUP Illumination8a. Turning the Machine OFF / Rinsing Coffee Preparation 9a. PRE-WARM Cups9b. Brewing Coffee and Espresso Example 9e. Using PRE-GROUND Coffee9c. Overriding Strength and CUP Size During Brewing 9d. the a LA Carte ButtonAuto Cappuccino System 10a. Preparing the Thermal Milk Container10b. the Frothxpress System 10c. Preparing ONE-TOUCH CAPPUCCINO, Café Mocha and Latte 10d. Preparing ONE-TOUCH Latte Macchiato10e. Preparing HOT Milk / HOT Chocolate 10f. Overriding the Cappuccino Settings 10h. Using HOT Water10g. Cappuccino Rinsing Water Care Enough MILK?Enough COFFEE? 12a. Water Hardness Monitor12b. Changing the Water Hardness Monitor Clearyl Water Filter Cartridge13b. Automatic Clearyl Replacement 13a. Installing & Activating the Clearyl WaterInstalling CartridgeSetting AM/PM / OZ MaintenanceEconomy Mode Start YESTEMPERAT. Normal Coffee 3.5 OZEconomy Mode 1 Save Level Restoring Factory Settings for Beverage ButtonsEconomy Mode Save no Economy ModesEconomy Mode 2 Save Level Actual Time and WeekdayAUTO-ON and AUTO-OFF Times Rinse Settings AUTO-OFFRinse cycle Init Rinse Press Rinse Fill System / Press RinseFill Water Tank Tray Missing Coffee Ready / Clean MachineCoffee Ready / Clean NOW Fill BeansEmptying the System Before Transport General Cleaning InstructionsCleaning the Frothxpress System EmptyingAutomatic Cleaning Cycles Cleaning with Special Tablet Manual Tablet Cleaning DecalcifyingDecalcifying Procedure Coffee Ready / Decalcify Machine Manual DecalcifyingError 2, Error Error Messages / TroubleshootingError 1, Error 3, Error Error 6, Error 7, ErrorGrinder Makes AN Extremely Loud Noise no Beans are Ground SuppliesClearyl Water Filter Cartridge one included This Warranty does not Cover Auto-Cappuccino Cleaner one bottle included. Model #63801Limited TWO-YEAR Warranty You can order these suppliesPage Jura-Capresso Inc