Jura Capresso 68193 warranty Grinder Makes AN Extremely Loud Noise no Beans are Ground, Supplies

Page 36

B. THE DISPLAY READS "FILL WATER TANK" BUT THERE IS ENOUGH WATER IN THE WATER TANK.

Reason: The floatation device (Fig.1,4) is stuck or missing.

Solution: Clean the water container and make sure the floatation device moves freely.

Solution: Within the water tank is a small compartment (like a mouse trap). Inside is a small black floatation device. On top is a small clear see-through plastic cover. This small plastic cover is missing and the floatation device is outside of the small com- partment. Check if you can find both pieces inside the water tank and put it back together. If you cannot find the pieces call 1-800-220-5701. We will send the pieces FREE OF CHARGE.

C. INSUFFICIENT FROTHED MILK PRODUCTION Reason: Milk is initially not cold enough or your milk is not suited for thick frothing.

Solution: Make sure milk is cold. Use a different type of milk. Skim milk will produce the thickest and longest lasting froth. Full fat milk will produce less thick froth.

Reason: The components of the frothXpress are not assembled properly, or the components are clogged with hardened milk, or one or more of the components are missing.

Solution:

a. Remove frothXpress. Check that steam comes out of the steam nozzle. Place a cup underneath the steam nozzle and use the milk function (chapter 10e). CAUTION: hot steam is dispensed from the steam nozzle.

If no steam is released stop the milk function and use a needle to clear blockage inside the steam nozzle.

b. Clean all frothXpress parts and assemble properly (chapter 15.5).

c. If any parts are missing call: 1-800-220-5701.

D. GRINDER MAKES AN EXTREMELY LOUD NOISE; NO BEANS ARE GROUND

Reason: A stone or object is blocking the burr grinder.

Solution: See chapter 15.2.

E. THE REMOVABLE DRAWER (Fig.1, 18) DOESN’T COME OUT Reason: The internal used coffee disposal chute did not retract. Solution: Turn off the machine. Wait a minute. Turn machine on and wait until it stops making any noise. Now try to pull out the drawer. If this does not work, turn the machine off. Now pull the drawer out with some force. You will feel some resistance. When the drawer is out you will see that the back wall of the used cof- fee container (Fig.1,16) is missing.

Reach into the machine and retrieve the back wall (it is a small black flexible piece). Set the used coffee container aside and insert the drawer (without the used coffee container) into the machine. Turn the machine on. Wait until all noise has stopped. The disposable chute should retract. Remove the drawer, replace the used coffee container and insert it back into the machine. Check if the drawer comes out easily.

20. SUPPLIES

The following supplies are necessary to keep your machine in good working order:

Clearyl Water Filter Cartridge (one included).

Model #64553; the machine will remind you automatically. Tip: If you brew 10 cups a day you need about one Clearyl cartridge per month. Always keep extra cartridges available.

36.

Image 36
Contents Impressa S9 Important Safeguards Customer Service Jura-CapressoHeight-Adjustable Dual Coffee Spout Service Cover La Carte ButtonGround Coffee Button CUP Espresso ButtonExtension rod Frothing range Page Table of Contents Table of Contents Important / Battery BACK-UP Welcome to the Impressa S9 One TouchPLEASE, DON’T... or you void your warranty protection 3a. BEAN-TO-CUP / Crema CoffeeHigh Pressure Brewing 3b. Different Coffee DrinksFactory Settings / Options PLEASE, doXMILD, MILD, NORMAL, STRONG, Xstrong Factory Settings for Beverage Buttons Other Factory SettingsPreparing the Machine for the First Time 6a. Filling the Water TankAdjusting the Grinder 6c. Turning the Machine on for the First TimeCoffee Ready 6d. CUP Illumination8a. Turning the Machine OFF / Rinsing Coffee Preparation 9a. PRE-WARM Cups9b. Brewing Coffee and Espresso 9e. Using PRE-GROUND Coffee 9c. Overriding Strength and CUP Size During BrewingExample 9d. the a LA Carte ButtonAuto Cappuccino System 10a. Preparing the Thermal Milk Container10b. the Frothxpress System 10c. Preparing ONE-TOUCH CAPPUCCINO, Café Mocha and Latte 10d. Preparing ONE-TOUCH Latte Macchiato10e. Preparing HOT Milk / HOT Chocolate 10f. Overriding the Cappuccino Settings 10h. Using HOT Water10g. Cappuccino Rinsing Enough MILK? Enough COFFEE?Water Care 12a. Water Hardness Monitor12b. Changing the Water Hardness Monitor Clearyl Water Filter Cartridge13a. Installing & Activating the Clearyl Water Installing13b. Automatic Clearyl Replacement CartridgeMaintenance Economy ModeSetting AM/PM / OZ Start YESTEMPERAT. Normal Coffee 3.5 OZRestoring Factory Settings for Beverage Buttons Economy Mode Save noEconomy Mode 1 Save Level Economy ModesEconomy Mode 2 Save Level Actual Time and WeekdayAUTO-ON and AUTO-OFF Times Rinse Settings AUTO-OFFRinse cycle Init Rinse Press Rinse Fill System / Press RinseFill Water Tank Coffee Ready / Clean Machine Coffee Ready / Clean NOWTray Missing Fill BeansGeneral Cleaning Instructions Cleaning the FrothxpressEmptying the System Before Transport System EmptyingAutomatic Cleaning Cycles Cleaning with Special Tablet Manual Tablet Cleaning DecalcifyingDecalcifying Procedure Coffee Ready / Decalcify Machine Manual DecalcifyingError Messages / Troubleshooting Error 1, Error 3, ErrorError 2, Error Error 6, Error 7, ErrorGrinder Makes AN Extremely Loud Noise no Beans are Ground SuppliesClearyl Water Filter Cartridge one included Auto-Cappuccino Cleaner one bottle included. Model #63801 Limited TWO-YEAR WarrantyThis Warranty does not Cover You can order these suppliesPage Jura-Capresso Inc