Jura Capresso 68193 warranty 10f. Overriding the Cappuccino Settings, 10g. Cappuccino Rinsing

"MILK PORTION" siphons milk for a programmed time and stops automatically).

•Push the button inside the Selector Dial. The display shows MILK or MILK PORTION. During this time hot steamed / frothed milk is created and delivered into your cup.

COFFEE READY.

10f. OVERRIDING THE CAPPUCCINO SETTINGS

As with the coffee buttons you can override the pre-programmed volumes of the milk beverage buttons.

Example: The factory setting for the Cappuccino button is normal strength (3 beans graphic), 14 seconds of milk frothing and 2 oz. of coffee. Prepare a one-time special cappuccino, extra strong (5 beans graphic), more milk froth (20 seconds) and 3 oz. of coffee.

COFFEE READY

•Place your cappuccino cup under the Cappuccino system and open the cover for the Rotary Dial (Fig. 1.19).

•Push the Cappuccino Button (Fig. 3.6). During grinding turn the Rotary Dial to change the strength until the display shows the 5 bean-graphic.

•When the frothing starts turn the rotary dial until the display shows 20 SEC.

•When the coffee brewing starts turn the Rotary Dial until the display shows 3.0 OZ.

10g. CAPPUCCINO RINSING

In only a few seconds this rinsing program removes milk droplets inside the frothXpress.

After preparing a beverage with milk (Cappuccino Button, Latte Macchiato Button, Milk, Milk Portion) the S9 OT display shows

COFFEE READY / RINSE CAPPUCCINO and the Rinse button illuminates. You can still continue making any beverages. We recommend to perform the cappuccino rinsing since it takes only a few seconds and makes sure that your frothXpress is free of any milk.

•Turn the frothXpress dial to the 3 o’clock position (Fig. 16) and place a cup underneath the cappuccino system.

•Push the Rinse button. The display shows CAPPU. RINSING. Hot water is pushed through the frothXpress for a few seconds.

COFFEE READY.

•Turn the frothXpress dial back to your preferred position.

IMPORTANT: If you do not use the Cappuccino Rinsing cycle, milk droplets might harden inside the frothXpress, resulting in insufficient frothing performance.

10h. USING HOT WATER

The hot water function lets you pre-warm cups, brew tea, make a quick cup of soup, or add hot water to your coffee or espresso to create a milder flavor.

•Place a cup under the hot water spout (Fig. 4).

•Turn the Selector Dial (Fig. 3.3) until the display shows HOT WATER or HOT WATER PORTION (HOT WATER PORTION delivers a pre-programmed amount of hot water and then stops automatically. HOT WATER delivers hot water until you stop the action by pushing the Selector Dial button again).

•Push the button inside the Selector Dial. The display shows the pre-set temperature e.g. TEMPERAT. X HIGH and then HOT WATER or HOT WATER PORTION.

COFFEE READY.

20.