Saeco Coffee Makers SG200E Maximum temperature, Wash cycle, Pre-grinding, Text Stand-by

Page 35

English

-Maximum temperature

It allows you to assign the temperature to which the vending machine is brought after a certain time from the last dispensing, so that the natural lowering of the temperature of the hydraulic circuits can be compensated. Set value is not expressed in centigrade.

-Wash cycle

It enables starting the mixing bowls automatic wash.

The automatic wash is performed as follows: the first wash take place 10 minutes after the ‘machine ready’ status; if necessary, other washes occur 7 hours after the last brewing.

Recommended solutions

Automatic washes should be set only if the machine is used together with the cabinet, which is equipped with a large discharge fluid thank.

-Pre-grinding

It validates instant pre-grinding of the coffee dose

-Instant product preheating

It allows enabling preheating only for selected products.

Example: the settings shown in the figure validate preheating for instant product 1 with 10 units of water and do not validate preheating for instant product 2.

Preheating for an instant product is executed if: at least 3 minutes have passed since the mixing bowl was used; the amount of water for the instant product is < 50 units.

Recommended solutions

Instant product preheating should be set only if the machine is used together with the cabinet, which is equipped with a large discharge fluid thank.

-Clock (shown only if the clock module has been installed)

It allows you to set current hours, minutes, day of the week, day of the month, month and year.

-Coffee / beverage pulse counter - shown only if the ‘complete menus’ option is validated The electromechanical pulse counter 24V dc (option) allows to choose whether to count only coffee or all the beverages brewed.

-Text: Stand-by

It allows you to enter the message displayed when the vending machine is in normal operating mode.

 

 

SOLUBLE 1

PREHEAT.

 

SOLUBLES

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

SOLUBLE 2

0

By validating this function the vending machine execute a preliminary water brewing through the circuit corresponding to the selected instant product. The user can choose the instant products for which to validate the prewash by setting a value >0 for the water to be used for prewashing.

-Text: Dispensing

It allows you to set the message displayed when the vending machine is brewing a product.

-Text: Out of Service

It allows you to set the message displayed when the vending machine stops for a failure.

-Text: Preselection

It allows you to set the message displayed when the preselection mode is activated.

35

Image 35
Contents Type SG200E Operation and MaintenanceMain Parts Table of Contents Introduction to Manual Read General instructions Data Plate Operators requirements Technical SpecificationsContainer Capacity Safety StandardsGeneral safety rules CUP DispenserStorage Handling and StorageHandling and transport Beverage Selection General Technical DescriptionInstant Beverage Brewing AVAILABLE’CUP, Sugar and Stirrer Dispensing Espresso Coffee Brewing Positioning InstallationReceipt Remove the key from the beverage dispensing outlet fig Water system connection Power supply connectionMachine start-up Cleaning and filling of resin- based water softener InstallationWater circuit filling Cleaning the parts in contact with foodstuffs Product loading Container loading Do not Attempt to Turn Coulumn Manually Label insertionCup loading Stirrer loading Payment system installation on the machine Payment System InstallationRif.1 Payment system installation on the base cabinetBeverage Programming and Maintenance MenuKey Down Key 〉 UP Key c Cancel / beverage Key Down / sugar fig Description of programming and maintenance phase keysKey c Cancel /beverage 01 fig Key e Enter / beverage 05 figContinues System Management Beverage YES Continues Instant KEY= Preselection Price Table Timetable Setting System Management Never Free Functions of the programming menu ResetMinimum temperature Structure of the programming menuPre-grinding Maximum temperatureText Out of Service Wash cycleMultiple beverage StirrerKey Instant Product beforePayment Systems Overpay time Banknote ValueProtocol MultivendCoffee Water Instant productExample Instant waterBeverage prices Maintenance menu Accessing the maintenance menuPrice table Maintenance Error Operational defects Failures Description of maintenance menu messagesMaintenance Error / Message nnError Log Automatic Error ResetReset failed LOG Monitor Operation Method Display MessageSoftware updating WashingBoiler emptying StatisticsDaily cleaning MaintenanceCleaning and loading English Weekly cleaning Week Month SIX MaintenanceProduct loading EveryBrew group maintenance Scheduled and unscheduled maintenanceAdjustments Dose and grinding adjustment Cup releasing device cleaning and adjustment Importante Align the Five SCROLLS’ Align the TWO Arrows References Selection Number Resin regeneration where the water softener is providedInactivity Dismantling Messages during operation Error code Messaggio Cause CureDisplay Messages Out of service/Failure conditions YES Or coffee stop Beverages State Function Visual Signals LEDOn the CPU card LEDCN1 CN6CN2 CN3On the Power card I/O English English English English English Cod -956-ED

SG200E specifications

The Saeco Coffee Maker SG200E is a remarkable machine that caters to coffee enthusiasts who appreciate both convenience and quality in their brewing experience. With its sleek design and user-friendly interface, the SG200E stands out in the world of automatic coffee makers, ensuring that both novice users and seasoned baristas can enjoy a delicious cup of coffee at the touch of a button.

One of the main features of the Saeco SG200E is its advanced brewing system, which employs cutting-edge technology to enhance the flavor extraction process. The machine uses the patented Saeco Brewing System, allowing users to customize their brew according to their personal taste preferences. This feature ensures that whether you prefer a strong espresso or a milder Americano, the SG200E can deliver the perfect cup every time.

Another significant characteristic of the SG200E is its integrated grinder, equipped with ceramic burrs that grind the beans to an ideal consistency. Ceramic grinders are known for their durability and ability to preserve the rich aromas of the coffee, making them a favorite among coffee aficionados. Users can adjust the grind settings to achieve their desired coarseness, providing them with complete control over their coffee experience.

The Saeco SG200E also features a user-friendly digital display that simplifies navigation and allows for easy programming of your preferred beverages. From selecting the size of your drink to adjusting strength and temperature, the intuitive interface makes it easy for anyone to create their perfect cup.

Additionally, the SG200E is designed with maintenance in mind. Its removable brewing unit and dishwasher-safe components make cleaning a breeze, ensuring that your coffee maker remains in optimal condition without the hassle of complicated upkeep.

The steam wand is another highlight, designed for frothing milk to create delicious cappuccinos and lattes. With its powerful steam output and ease of use, users can achieve barista-quality frothed milk at home, bringing café-style beverages into their kitchen.

In conclusion, the Saeco Coffee Maker SG200E embodies the perfect blend of technology, convenience, and customization. Its advanced brewing system, integrated grinder, user-friendly interface, and maintenance features make it a top choice for anyone seeking to elevate their coffee experience at home. Whether for a single cup or entertaining guests, the SG200E ensures that every brew is a delightful journey into the world of coffee.