Vita-Mix BarBos MP owner manual

Page 9

The Accelerator Tool prevents an air bubble from forming while blending. It is used when making frozen ice creams, pureeing fruits and vegetables, (or whenever your mixture requires it). It also permits you to push ingredients down around the blades while the Vita-Mix blender is running.

Accelerator Tool use:

Use only with the lid in place and the center lid plug removed.

The splash disc prevents the Accelerator Tool from hitting the blades when insert- ed through the lid.

Container should not be more than 2/3 full (just below the indicated maximum capacity for XP containers) when the Accelerator Tool is left in place while blending.

To avoid overheating, do not exceed 30 seconds of continuous blending with Accelerator Tool in place.

If thick mixtures stop circulating, you have likely trapped an air bubble. Insert Accelerator Tool through the lid and stir to release it.

Holding the Accelerator Tool at an angle near the side and pushing towards the center will be more effective when creating a thicker, smoother drink.

4

*NOTE: Accelerator Tools have a small step on them. The step prevents the Accelerator Tool from coming into contact with the blades in Vita-Mix polycarbonate containers. Accelerator Tool cannot be used with a one piece non-latching lid.

9

Image 9
Contents BarBoss MP Drink Machine MP Do not use outdoors Important SafeguardsSave These Safety Instructions BarBoss MP Drink Machine MP Model Two-Part Lid One Piece Lid optionalTwist the center lid plug to fasten or remove BarBoss MP & Drink Machine MP Instructions Page Replacing Blade Assembly Blade Assembly RemovalPage Do not use abrasive cleaning agents or concentrated bleach Cleaning Product SupplierCare Note Klenzade ProductsMotor Base Unplug the power cordLid ContainerItem # Part BarBoss MP & Drink Machine MPProblem Solution #1 Top four problems you can fix on your ownSolution #2 Solution #3Page Page Dimensions Power RequirementsFoodservice Division