Vita-Mix BarBos MP owner manual Care Note, Cleaning Product Supplier, Klenzade Products

Page 10

Care Note

To ensure that you get the longest possible life from your Vita-Mix product, we recom- mend the following products, when used as directed by the supplier:

Cleaning Product

Supplier

Solid Supra, Solid Power,.. . . . . . . . . . . . . . . . . . . . . . . . Ecolab, Inc., St. Paul, MN

Guardian Acclaim, Solid Guardian Plus,

(800) 352-5326

Solid Super Impact, Solid Insure

www.ecolab.com

Diverpak

Diversey, Livonia, MI

Eclipse H2, Liqui-Safe L7

(800) 521-8140

Acclean

Klenzade Products

Poly-Brite

Division of Ecolab

 

St. Paul, MN

Glow MB-1

(612) 293-2165

Wesmar Company, Inc.

Lustre NC-25

Seattle, WA

Lustre Plus

(206)783-5344

 

www.wesmar.com

PSRA 41-D, PSRA 41-E

Anderson Chemical Co.

Liqui-Ware 1, Liqui-Ware MC

Litchfield, MN

D-Flex, Sur-Met

(800) 366-2477

 

www.andersonchemical.com

Rinse Aids

Supplier

Solid Rinse Dry

Ecolab, Inc., St. Paul, MN

Solid Brilliance

(800) 352-5326

Jet Dry, Rinse Dry

www.ecolab.com

Destainer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supplier

NuWareDiversey, Livonia, MI

(800) 521-8140

Do not use abrasive cleaning agents or concentrated bleach

when cleaning. Do not use any cleaners containing Quatinary Sanitizers on polycarbonate components (i.e., containers).

NOTE: Switches will become sticky from use. Use a wet cloth or sponge to flush and clean in the groove around the water-shielded switches. You may also lightly spray the surface around the switches with an all-purpose cleaner (such as Cinch® or 409®) and work the switches back and forth a few times to loosen any dried residue under switch. Dirty switches may burn out.

ADDITIONAL NOTE: Do not let mixtures, liquids and food products dry within the container. Rinse throughout use. Drying may lock around the blade and weaken/tear the bearings seal when restarted. Do not place containers in the freezer. Extremely low temperature combined with hot ingredients and/or the immediate rapid action of the blade may crack the container. Due to the nature of polycarbonates, microwaving and automatic dishwashing are not recommended. Follow the cleaning instructions on page 11.

10

Image 10
Contents BarBoss MP Drink Machine MP Important Safeguards Do not use outdoorsSave These Safety Instructions BarBoss MP Drink Machine MP Model One Piece Lid optional Two-Part LidTwist the center lid plug to fasten or remove BarBoss MP & Drink Machine MP Instructions Page Blade Assembly Removal Replacing Blade AssemblyPage Care Note Cleaning Product SupplierDo not use abrasive cleaning agents or concentrated bleach Klenzade ProductsLid Unplug the power cordMotor Base ContainerBarBoss MP & Drink Machine MP Item # PartSolution #2 Top four problems you can fix on your ownProblem Solution #1 Solution #3Page Page Power Requirements DimensionsFoodservice Division