Vita-Mix BarBos MP owner manual Save These Safety Instructions

Page 3

Important Safeguards

Enjoy the safety of this grounded appliance. The Vita-Mix blender’s U.S. power cord comes equipped with a three-prong (grounding) plug which mates with a standard three- prong wall outlet (Figure A). This cord will vary for countries outside the United States.

Adapters (Figure B) are available for two-prong outlets. Do not cut or remove the third (ground) prong from the plug or power cord.

Consult your electrician if you are not sure if the wall outlet is grounded through the building wiring. With a properly grounded two prong wall outlet, ground the machine by attaching the tab on the adapter to the wall outlet cover by means of the screw in the center of the cover (Figure B).

THREE PRONG

 

 

ADAPTERS

 

 

ARE NOT TO

 

 

BE USED IN

Figure A

Figure B

CANADA.

 

 

Save These Safety Instructions

3

Image 3
Contents BarBoss MP Drink Machine MP Do not use outdoors Important SafeguardsSave These Safety Instructions BarBoss MP Drink Machine MP Model Two-Part Lid One Piece Lid optionalTwist the center lid plug to fasten or remove BarBoss MP & Drink Machine MP Instructions Page Replacing Blade Assembly Blade Assembly RemovalPage Klenzade Products Cleaning Product SupplierDo not use abrasive cleaning agents or concentrated bleach Care NoteContainer Unplug the power cordMotor Base LidItem # Part BarBoss MP & Drink Machine MPSolution #3 Top four problems you can fix on your ownProblem Solution #1 Solution #2Page Page Dimensions Power RequirementsFoodservice Division