Kenmore 790.9751 manual To Set the Recipe Recall Feature, Restoring factory default settings

Setting Oven Controls

To Set the Recipe Recall Feature

This feature will ONLY recall a Bake, Convection Bake, Cakes, Breads, Convection roast, Slow Cook, Cook Time or a Cook Time with a Warm & Hold added setting. This feature will not work with any other function including a Delay Start, a Clean Cycle or a Broil setting.

Instructions	PRESS	DISPLAY
To Program the Oven to Begin Baking Immediately and record
a Recipe (example: for a Bake mode at 425°C)
1. Place the food in the oven.

2.Press .

3.Press (Fig. 1).

4.Press 4 2 5 (Fig. 2).

5.Press and hold pad for at least 3 seconds or until a beep sounds. The beep indicates that this recipe has been recorded for future recall.

Fig. 1

4 2 5

for 3 seconds. Fig. 2

To Program the Oven to Begin Baking with a stored Recipe

1.Place the food in the oven.

2.	Press	and then	(Fig. 2).	and then
3.	The Temperature (and the cook time, if programmed) is recalled,
	the oven will begin immediately to cook with the previously
	recorded recipe.

Restoring factory default settings

When new, your appliance left the factory with predetermined oven control setting. Over time, the user may make changes to these settings. The following options have user preferences that could be modified and may have been changed since the appliance was new:

12 or 24 hour display mode;

Continuous bake or 12-Hour Energy Savings mode; Silent or audible control;

Oven temperature display (Fahrenheit or Celsius);

Oven temperature adjustment;

Any stored recipes;

Accent Light brightness setting.

Please remember that if you choose to restore, ALL of the above preferences will be restored to factory default settings, the oven temperature offset will reset and any stored information will be cleared.

1.Press and hold 7 keypad until first beep sounds (about 6 seconds).

2.Press .

32