Kenmore 9664, 790-.9663 manual Setting Continuous Bake or 12 Hour Energy Saving, Instructions

Setting Oven Controls

Continuous Bake or Twelve Hour Energy Saving Mode

Timer

Setting Continuous Bake or 12 Hour Energy Saving

The TIMER _si_0e_and FLEX CLEAN _ pads control the Continuous Bake or 12 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left

on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS PRESS DISPLAY

To set the control for Continuous Bake or 12 Hour

Energy Saving features:

1. Press and hold _ for 6 seconds or until the control beeps _for 6 seconds

once. (Fig.l). "12h" or "== h" will appear in the display and the control will beep once.

2.Press _CC_leeato switch, between the 12 Hour Energy Saving and

continuous bake features. Note: "12h" (See Fig. 2) in the display indicates the control is set for 12 Hour Energy Saving

feature and % =h" (See Fig. 3) indicates the control is set for the Continuous Bake feature.

3. Press to accept the change (See Fig. 4) display will

Fig. 1

Fig. 2

return	to time of day) or press _	to reject the change.
Setting	Timer	Fig. 4

The TIMER _o_f_ pad controls the Timer feature. The Timer serves as an extra reminder in the kitchen that will beep when

the set time has run out. The Timer will not START or STOP the cooking process. The Timer feature may be used during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 18 for time amount settings.

INSTRUCTIONS PRESS DISPLAY

To set the Timer (example for 5 minutes):

1.	Press _.		(See Fig.	5).
2.	Press the	number pads to set the desired				time in the display	Fig. 5
	(example	(5)).	Press	_.	The timer will begins count		!
	down. (See Fig. 6).
	Note: If _		is not pressed		the timer will	return to the time of	Fig. 6

day.

3.When the set time has run out, the clock will sound with 3 long beeps every 5 seconds until d_?0e5 is pressed (See Fig. 7).

To cancel the Timer before the set time has run out:

Fig. 7

Press _5. The display will return to the time of day.

22