Kenmore 790.75604 Stopping or Interrupting a Self-Cleaning Cycle, To Start the Self-Clean Cycle

Self-Cleaning

To Start the Self-Clean Cycle

For satisfactory results, use a 2 hour self-clean cycle for light soils and a 3 hour cycle for average or heavy soils. NOTE: The kitchen area should be ventilated using an open window, ventitlation fan or exhaust hood during the first self-clean cycle. This will help eliminate the normal odors associated with the first self-clean cycle.

To Set the Controls for a Self-Clean Cycle:

1.Be sure the clock shows the correct time of day.

2. Press m" " "appears in the display.

3.Pressthe A until"3:00"appearsinthedisplayfora3hourcycle,orpressthe v until "2:00" appears in the display

for a 2 hour cycle.

4. As soon as the A or v is released, "CLn" appears in the display.

5.As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the oven door to lock).

6.The "LOCK" light will glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1.The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

3. If"End" is in the display and the "Clean" indicator remains on, press	_.	The	time of day will appear in the display.
NOTE: When the oven is cool, wipe away any residue or powdered ash	with a damp		cloth or paper towel.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle:

1.Press _.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

3.Restart the self-clean cycle once all conditions have been corrected.

To avoid possible burns use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use ca ution and avoid possible burns when opening the door after the self-cleaning cycle has completed. The oven may still be VERY HOT.

18