Kenmore 790.467 manual Consumer Defined Control Features

Consumer Defined Control Features

Setting Temperature Display --Fahrenheit or Celsius:

The BROIL ¢'Broii"_and FLEX CLEAN @ pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

iNSTRUCTiONS

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit

1. To tell if the display is set for Fahrenheit or Celsius press Bro

(Figure 1) and hold for7 seconds; "550 °''will appear and

"BROIL" will flash in the display and a beep will sound. If "F"

appears, the display is set to show temperatures in Fahrenheit

(Figure 2). If "C" appears, the display is set to show

temperatures in Celsius (Figure 3).

PRESSDISPLAY

for 7seconds Figure 1

2. Press @	to switch between	Fahrenheit or Celsius display
modes. The	display will show	either "F" (Figure 2) or "C"
(Figure 3).

@

Figure 2

3. Press to accept the change or press to reject the

change.

START"or	Q	Figure 3
.............%

18