Kenmore 790.3105 Setting Clock, Adjusting Oven Temperature, Setting Silent Control Operation

Page 25

User Preferences

Setting Clock

See the example below to set the clock to 1:30.

1.Press Q.

2.Enter 1:30 to advance to 1:30.

3.Press START to accept or press STOP to reject.

Setting 12 or 24 Hour Mode

The clock display mode allows you to choose between 12 and 24 hour mode. The factory preset clock display mode is 12 hour.

See the example below to change the default mode to 24 hour.

1.Press and hold (_ for 7 seconds until "12Hr dAy" or "24Hr dAy" appear in the display.

2.Press FLEX CLEAN to switch between the 12 and 24 hour mode.

3.Press START to accept or press STOP to reject.

Adjusting Oven Temperature

User preference offset

Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully.

If you feel your oven is too hot or too cool from your baking

experience, the oven temperature may be adjusted to your

liking. The temperature may be increased up to +35°F (+19°C)

or decreased down to -35°F (-19°C) from normal.

See the example below to increase the temperature.

1.Press and hold BAKE for 7 seconds until UPO appear in the display.

2.Enter the desired temperature change using the number pads. FLEX CLEAN can be pressed to lower the temperature.

3.Press START to accept or press STOP to reject.

Setting Silent Control Operation

The silent control operation allows you to control the audio for the oven control. You may turn the audio off: and later return to operating with all the normal audible sounds and alerts.

See the example below when changing the audible settings.

1.Press and hold DELAY START for 7 seconds until BEEP appears in the display.

2.Press FLEX CLEAN to switch between the On and Off:

mode.

3. Press START to accept or press STOP to reject.

Changing Between F° or C °

Your control has the ability to display and set Fahrenheit or

Celsius temperatures. The factory preset temperature display is Fahrenheit.

See the example below to change the default temperature

display to Celsius.

1.Press and hold BROIL for 7 seconds until F or C appear in the display.

2.Press FLEX CLEAN to switch between the F and C mode.

3.Press START to accept or press STOP to reject.

Setting 12hr Energy Saving Mode

The oven control has a factory preset built-in 12 hour energy saving feature that will shut off: the appliance if the oven has been heating for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

See the example below to turn off: 12 hour energy saving

mode.

1.Press and hold TIMER for 7 seconds until "12Hr OFF" or "StAy On" appear in the display.

2.Press FLEX CLEAN to switch between the "12Hr OFF" or "StAy On" mode.

3.Press START to accept or press STOP to reject.

Restoring Factory Default Settings

When new, your appliance was set with predetermined oven control settings. Over time, the user may make changes to these default settings. The following features or functions have user options or adjustments that may have been changed from the factory default settings:

°12 or 24 hour display mode

°Continuous bake or 12-Hour Energy Savings mode

°Silent or audible control

°Oven temperature display (Fahrenheit or Celsius)

°Oven temperature adjustments

°Aii stored recipes

Please be aware before restoring to factory default

settings that ALL of the above user settings wiii be restored, including any oven temperature offset and any stored recipe information.

1.Press and hold the 7 numeric keypad until acceptance tone sounds (about 6 seconds).

2.Press START. The control wiii reset aii user preference settings back to factory default settings.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents =Color numbe n0mero de color English / Espaol Models/ModelosContents Property damage, personal injury or death Save these instructions for future referenceUser Servicing. Do not repair or replace IMPORTANT iNSTRUCTiONS for Using Your Oven Clean in the serf-cleaning cycle only the partsConversion to Liquefied Product RecordYour Range includes Features at a GlanceOven Vent Location Before Setting Oven ControlsArranging Oven RacksSurface Cookware Recommendations Using a Wok not suppliedCookware Material types Use Proper CookwareRemember Before Setting SurFace ControlsIncorrect Burner Cap Setting the Regular or Simmer Burners Setting Proper Surface Burner Flame SizeProper Recommended Rack Position for Broiling, Baking and Roasting Oven Control Functions20r3 2and Lor2 MinTo Set Add 1 Minute Feature Setting Clock at Power UpPreheat Temperature Display Setting Oven LockoutSetting bake Setting Oven ControlsPreheat BakeCook Time Delay Start with cook timeFor best results Convection BakePress Conv Convert Convection ConvertConvection Roast WeightBenefits of convection roast Broil Setting BrollCook flme Minutes Warm & Hold TM Cakes BreadsMeat Probe Proper probe placementTo Set Meat Probe To Set Meat Probe Meat Probe cantdRecipe Recall Slow CookCancelling Sabbath mode Sabbath ModeExample below shows how to cancel the Sabbath mode Star=k.orgAdjusting Oven Temperature Setting ClockSetting Silent Control Operation Setting 12hr Energy Saving ModeHand Clean Door Before Starting Self-CleanWhat to Expect during Cleaning Remove any excessive spillovers in the oven cavityFlex Clean Cycle Self-Cleaning CyclePress Flex Clean Press Delay StartSurface Type Care & CleaningControl panel Oven interiorCleaning burner caps Cleaning the Cooktop and Surface BurnersCleaning surface burner heads To clean the burner head ignition portsTo Replace Oven Door Removing and Replacing the Oven DoorReplacing the Halogen Oven Light Removing and Replacing the Drawer To Remove the DrawerRemove the drawer and repeat steps thru Lift up and pull outOven Baking Fan noise during cooking Faulty installationSoll not completely removed Oven smokes excessivelyCompleted Master Protection Agreements Protection AgreementsOur Home Your Home
Top Page Image Contents