Kenmore 790.4941, 790.4943 manual Removing and Replacing the Oven Door, To remove the oven door

Page 19

Removing and Replacing the Oven Door

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

To remove the oven door:

1.Open oven door completely, horizontal with floor (See Figure 7).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely toward the oven door (See Figure 8). A tool such as a small flat-blade screw- driver may be required.

3.Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 9).

4.Close the door to approximately 10 degrees from the oven door frame.

5.Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 9).

To Replace Oven Door:

1.Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 9).

2.Holding the oven door at the same angle as the removal position (See Figure 9), seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 10). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door, horizontal with floor (See Figure 7).

4.Push the door hinge locks up toward and into the oven frame on both left and right oven door hinges to the locked position (Figure 8).

5.Close the oven door.

Important:

Special Door Care Instructions - Most oven doors contain glass that can break. Do not close the oven door until all the oven racks are fully in place. Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Care and Cleaning

Oven door

hinge

locations

Figure 7: Door hinge location

 

 

K

 

C

O

 

L

 

 

Figure 8: Door hinge locks

about 10°

oven door

hinge

Figure 9: Holding door for removal

roller

pin

hinge arm

Figure 10: Location of hinge arm and roller pin

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Wall Oven Table of Contents Save these instructions for future reference Important Safety InstructionsImportant Safety Instructions Cold temperatures can damage the elec For models factory-equipped with a power cord Removing, arranging and replacing racks Before setting oven controlsOven vent location Type of oven racksOven Controls Minimum & maximum control settingsNumeric Keypad Used to enter temperature and times FeatureSetting Continuous Bake or 12 Hour Energy Saving Setting the ClockSetting Oven Timer Restoring factory default settings To Set Add 1 Minute FeatureSetting the Oven Lockout Setting Silent Control OperationTo adjust the oven temperature higher Setting Cook TimeAdjusting Oven Temperature Setting Temperature display -- Fahrenheit or CelsiusPress C . Dashes will appear in the display Setting Delay StartWhen the bake time runs out Warm & HoldSetting Bake To cancel broiling or if finished broiling press Setting BroilTo set the oven to broil at 550F Press Bake Power failure while using Sabbath featureSelf-Cleaning Oven Self-Cleaning OperationAdhere to the following cleaning precautions Stopping or Interrupting a Self-Cleaning Cycle To Start the Self-Clean CycleWhen the self-clean cycle is completed Cleaning Various Parts of Your Oven Care and CleaningSurface Type Recommendation To Replace Oven Door Care and Cleaning Oven door Hinge LocationsRemoving and Replacing the Oven Door To remove the oven doorReplacing the oven light Care and CleaningTo replace the oven interior light bulb Important note Before You Call Baking Problems and Solutions Causes CorrectionsOven Baking Problem Solution Solutions to Common ProblemsBefore You Call

790.4941, 790.4943 specifications

The Kenmore 790.4943 and 790.4941 are part of Kenmore's prestigious line of appliances, designed to provide exceptional cooking performance, advanced technology features, and user-friendly operation. These models exemplify modern kitchens’ needs, catering to both novice cooks and seasoned chefs.

One of the standout features of the Kenmore 790.4943 and 790.4941 is their powerful gas cooking capabilities. Equipped with multiple burners, these ranges offer ample cooking space, allowing users to prepare multiple dishes simultaneously. The burners deliver precise heat control, ensuring that whether you are simmering sauces or rapidly boiling water, the temperature is just right.

A notable technology integrated into these models is the convection oven. This feature circulates hot air within the oven cavity, promoting even cooking and reducing cooking times. Ideal for baking and roasting, convection cooking is a game-changer, providing perfectly cooked dishes with a consistent texture and flavor. Additionally, both models come with a self-cleaning option, saving users the hassle of manual scrubbing and ensuring the oven remains pristine with minimal effort.

The user interface on Kenmore 790.4943 and 790.4941 is designed for simplicity. With a digital display, intuitive controls, and easy-to-read icons, setting the oven temperature or timer is straightforward. This makes for an accessible cooking experience, even for those who may not be technologically inclined.

Safety is a priority in these ranges. With features like an automatic shut-off and a control lock, users can cook with peace of mind, knowing that the appliance will not pose any dangers if left unattended.

Moreover, the sleek design of the Kenmore 790.4943 and 790.4941 adds a touch of elegance to any kitchen. Their stainless steel finish not only looks sophisticated but is also easy to clean and maintain.

In conclusion, the Kenmore 790.4943 and 790.4941 are exceptional cooking appliances, packed with features that enhance culinary experiences. From advanced convection cooking technology to user-friendly controls, these ranges are suitable for anyone looking to elevate their cooking game while enjoying the benefits of modern innovation and style.
Top Page Image Contents