Kenmore 790.4941, 790.4943 manual Setting Cook Time, Adjusting Oven Temperature

Page 11

Setting Temperature display -- Fahrenheit or Celsius

The Broil and Self-Cleankeys control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens will be changed at the same time.

To change display from Celsius to Fahrenheit or Fahrenheit to Celsius:

1.Press and hold Broil for about 6 seconds. A beep will sound, 550 will appear BROIL will flash in the display. Continue to hold key until it beeps and F or C appears in the display.

The F means the oven is set for temperatures in Fahrenheit and the C showing means the oven is set for temperatures to display in Celsius.

Oven Controls

Setting Cook Time

The Bake and Cook Time keys control the Cook Time feature. The automatic timer of the Cook Time feature will turn the oven off after cooking for the desired amount of time you selected.

To program the oven to begin baking immediately and to shut off automatically (example: Bake at 350°F for 30 minutes)

1.Be sure the clock is set for the correct time of day

2.Arrange oven racks and place food in oven.

3.Press Bake.

4.Press . The actual oven temperature will appear in the display..

5. Press Cook Time. Dashes will appear in the display.

2.Press Self-Cleanand toggle to switch between Fahrenheit or Celsius modes.

3.Press to accept the change.

Adjusting Oven Temperature

Before adjusting, test a recipe by using a temperature setting higher or lower than the recommended temperature. The results will help you to decide how much of an adjustment is needed. If the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. The temperature in the oven is pre- set at the factory to UPO 0.

To adjust the oven temperature higher:

1.Press Bake for 6 seconds. UPO 0 will appear in the display.

2.To increase the temperature use the number keys to enter the desired change (Example 30°F) 3 0. The temperature may be increased as much as 35°F (19°C).

3.Press to accept the temperature change and the display will return to the time of day.

To adjust the oven temperature lower:

1.Press Bake for 6 seconds. UPO 0 will appear in the display.

2.To decrease the temperature use the number keys to enter the change (Example -30°F) 3 0 and then press Self-Clean.The temperature may be decreased as much as 35°F (19°C).

3. Press to accept the temperature change and the display will return to the time of day.

4.Press STOP to reject the change if necessary.

6.Enter desired bake time by pressing 30. Note: Baking time can be set for any time between 1 minute and 11 hours and 59 minutes

7.Press . The display returns to the time of day (shown here as 1:30).

To check the bake time remaining, press cook time once and the time left in the baking process will appear for a few seconds in the display. A beep will sound once the oven has reached the set temperature. When the bake time finishes, END and the time of day will show in the display and the oven turns off automati- cally. The control will beep 3 times and continue to beep every

30 seconds until is pressed.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Wall Oven Table of Contents Save these instructions for future reference Important Safety InstructionsImportant Safety Instructions Cold temperatures can damage the elec For models factory-equipped with a power cord Removing, arranging and replacing racks Before setting oven controlsOven vent location Type of oven racksOven Controls Minimum & maximum control settingsNumeric Keypad Used to enter temperature and times FeatureSetting Oven Timer Setting the ClockSetting Continuous Bake or 12 Hour Energy Saving Restoring factory default settings To Set Add 1 Minute FeatureSetting the Oven Lockout Setting Silent Control OperationTo adjust the oven temperature higher Setting Cook TimeAdjusting Oven Temperature Setting Temperature display -- Fahrenheit or CelsiusPress C . Dashes will appear in the display Setting Delay StartWhen the bake time runs out Warm & HoldSetting Bake To set the oven to broil at 550F Setting BroilTo cancel broiling or if finished broiling press Press Bake Power failure while using Sabbath featureAdhere to the following cleaning precautions Self-Cleaning OperationSelf-Cleaning Oven When the self-clean cycle is completed To Start the Self-Clean CycleStopping or Interrupting a Self-Cleaning Cycle Surface Type Recommendation Care and CleaningCleaning Various Parts of Your Oven To Replace Oven Door Care and Cleaning Oven door Hinge LocationsRemoving and Replacing the Oven Door To remove the oven doorTo replace the oven interior light bulb Important note Care and CleaningReplacing the oven light Oven Baking Baking Problems and Solutions Causes CorrectionsBefore You Call Before You Call Solutions to Common ProblemsProblem Solution

790.4941, 790.4943 specifications

The Kenmore 790.4943 and 790.4941 are part of Kenmore's prestigious line of appliances, designed to provide exceptional cooking performance, advanced technology features, and user-friendly operation. These models exemplify modern kitchens’ needs, catering to both novice cooks and seasoned chefs.

One of the standout features of the Kenmore 790.4943 and 790.4941 is their powerful gas cooking capabilities. Equipped with multiple burners, these ranges offer ample cooking space, allowing users to prepare multiple dishes simultaneously. The burners deliver precise heat control, ensuring that whether you are simmering sauces or rapidly boiling water, the temperature is just right.

A notable technology integrated into these models is the convection oven. This feature circulates hot air within the oven cavity, promoting even cooking and reducing cooking times. Ideal for baking and roasting, convection cooking is a game-changer, providing perfectly cooked dishes with a consistent texture and flavor. Additionally, both models come with a self-cleaning option, saving users the hassle of manual scrubbing and ensuring the oven remains pristine with minimal effort.

The user interface on Kenmore 790.4943 and 790.4941 is designed for simplicity. With a digital display, intuitive controls, and easy-to-read icons, setting the oven temperature or timer is straightforward. This makes for an accessible cooking experience, even for those who may not be technologically inclined.

Safety is a priority in these ranges. With features like an automatic shut-off and a control lock, users can cook with peace of mind, knowing that the appliance will not pose any dangers if left unattended.

Moreover, the sleek design of the Kenmore 790.4943 and 790.4941 adds a touch of elegance to any kitchen. Their stainless steel finish not only looks sophisticated but is also easy to clean and maintain.

In conclusion, the Kenmore 790.4943 and 790.4941 are exceptional cooking appliances, packed with features that enhance culinary experiences. From advanced convection cooking technology to user-friendly controls, these ranges are suitable for anyone looking to elevate their cooking game while enjoying the benefits of modern innovation and style.
Top Page Image Contents