Kenmore 795.7900, 795.6900, 795.6827, 795.7827, 795.7809, 795.76200 HOW to Install Pull OUT Drawer

Page 12

HOW TO INSTALL PULL OUT DRAWER

IMPORTANT: To avoid possible injury, product or property damage, you will need two people to perform the following instructions.

•With both hands, hold the center of the bar and pull it out to let both rails out to full extension simultaneously.

• Hook door supports into rail tabs.

Fig. 1._ipp°rts _

• Lower door into final position and tighten the screws.

Fig. 19

Screws

•Align the top holes of the rail cover with the top holes of the door supports to assemble the rail cover.

Fig. 21

• Verify the hole'salignment.

Fig. 22

_,_

Fig. 23

•With the rails pulled out to full extension, insert the Durabase drawer in the rail assembly.

Fig. 24

Durabase

• Make sure you have the correct rail cover for each side.

Right

Rail cover

[] WARNING: To prevent accidental child and pet entrapment or suffocation risk, DO NOT allow them to play inside of drawer.

[] WARNING: DO NOT step or sit down on Freezer Door.

Image 12

Contents = color number English Version Spanish French One Year Limited Warranty Disclaimer of implied warranties limitation of remediesMaster Protection Agreements Page Before YOU Throw Away Your OLD Refrigerator Or Freezer Recommended Grounding MethodUSE of Extension Cords Electrical Shock HazardFreezer Drawer Model ODurabaseFreezer Swing Door Model Installation To Install Base GrilleUnpacking Your Refrigerator Base Grille InstructionsHOW to Remove Refrigerator Door HOW to Remove Pull OUT DrawerFor Freezer Drawer Models Ta es Top Replacing Refrigerator DoorHOW to Install Pull OUT Drawer Ipprts Lower door into final position and tighten the screwsREMOVING,REVERSING and Replacing Refrigerator Doors For Freezer Drawer ModelsFlat-head screwdriver for prying Pin HOW to Reverse Door Handle HOW to Replace Refrigerator Freezer Doors For Freezer Swing ModelsRefrigerator Doors For Freezer Swing Models 10mm or 13/32-inch socket wrenchNo Phillips head screwdriver 4inch socket wrench Pin Insert Bracket After After Completing the JOB Leveling and Door ClosingDoor Alignment Instructions below to align the doorsEnsuring Proper AIR Circulation Identify your control typeAdjusting Control Settings RefrigeratorFood Storage Guide Storing Frozen FoodRefrigerator Shelves Sliding Out Shelves optional on some modelsTo remove a sliding shelf from its metal frame Convenience Shelves optional on some modelsRefrigerator Features PantryOn some models Crisper Humidity Control on some modelsCrisper Cover with Lattice on Inner Surface on some modelsTo remove the glass To remove the crisper coverDoor Racks Door BinsDairy BIN EGG BOX on some modelsDurabase on some models Durabase Divider on some modelsWire Durabase on some models How to useGLIDE-OUT Drawer Basket on some models Tilting Door on some modelsGeneral Cleaning Tips Light Bulb ReplacementOutside Door Liners and GasketsPower Interruptions To change the freezer lightIf you choose to leave the refrigerator on while you When YOU should SET the Icemaker Power Switch to O OFF IcemakerNormal Sounds YOU MAY Hear Preparing for VacationPower drill Before YOU BeginInstallation Instructions Choose the Valve Location Drill the Hole for the ValveFasten the Shut OFF Valve Tighten the Pipe ClampConnect the Tubing to the Refrigerator Turn the Water on AT the Shut OFF ValvePlug in the Refrigerator Start the IcemakerRefrigerator does not Operate Vibration or Rattling NoiseCheck if ThenCompressor Motor Seems to RUN TOO Much Doors will not Close CompletelyFrost or ICE Crystals on Frozen Food Check if ThenRefrigerator Seems to Make TOO Much Noise Cubes Produced by Icemaker are TOO SmallDoors are Difficult to Open Automatic Icemaker does not Work Lights do not WorkIiiiiiiiiiiiiiiiiiiiiiii