Kenmore 795.76200, 795.7900, 795.6900, 795.6827, 795.7827 Adjusting Control Settings, Refrigerator

Page 23

I_ Identify your control type

•Refrigerator control: position 1 to 7 (32 °F to 47 °F or 0 °C to 8 °C)

The higher the number setting, the colder the refrigerator compartment will become.

f

/

.JR CE

_, ! t( fii_A ;&(

 

 

RECOMMENDED

CONDITION/REASON:

ADJUSTMENT:

REFRIGERATOR section

Turn

too warm

REFRIGERATOR

•

Door opened often

control to next

•

Large amount of food added

higher number,

•

Room temperature very warm

wait 24 hours,

 

 

then re-check

o I

•Freezer control: position 1 to 7 (-6 °F to 8 °F or -21 °C to -13 °C)

When the setting is at a higher number, the freezer compartment becomes colder.

•Ultra Ice

Press the Ultra Ice key and the LED will turn

on. This function will remain activated for 24 hours and

intensify the cooling speed of freezer and increase the amount of ice.

FREEZER section too warm/ ice not made fast enough

•Door opened often

•Large amount of food added

•Very cold room temperature (can't cycle often enough)

•Heavy ice usage

•Air vents blocked by items

REFRIGERATOR section too cold

•Controls not set correctly for your conditions

Turn FREEZER control to next

higher number, wait 24 hours, Then re-check

Move items out of airstream

Turn

REFRIGERATOR

control to next lower number, wait 24 hours, then re-check

ADJUSTING CONTROL SETTINGS

Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator for the first time. The mid-settings indicated in the previous section should be correct for normal Household refrigerator usage. The controls are set correctly

When milk or juice is as cold as you like and when ice cream is firm.

The refrigerator control functions as the thermostat for the entire appliance (refrigerator and freezer sections.) The higher the number setting, the longer the compressor will run to keep the temperature colder. The freezer control adjusts the cold air flow from the freezer to the refrigerator. Setting the freezer control to a lower temperature keeps more cold air in the Freezer compartment to make it colder.

If you need to adjust temperatures in the refrigerator or freezer, start by adjusting the refrigerator first. Wait 24 hours after the refrigerator adjustment to check the freezer temperature. If it is too warm or too cold, then adjust the freezer control as well.

Use the settings listed in the chart below as a guide.

Always remember to wait at least 24 hours between adjustments.

FREEZER section too cold

Turn FREEZER

• Controls not set correctly for

control to next

your conditions

lower number,

 

wait 24 hours,

 

then re-check

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents = color number English Version Spanish French Disclaimer of implied warranties limitation of remedies One Year Limited WarrantyMaster Protection Agreements Page Electrical Shock Hazard Before YOU Throw Away Your OLD Refrigerator Or FreezerRecommended Grounding Method USE of Extension CordsODurabase Freezer Drawer ModelFreezer Swing Door Model Base Grille Instructions InstallationTo Install Base Grille Unpacking Your RefrigeratorFor Freezer Drawer Models HOW to Remove Refrigerator DoorHOW to Remove Pull OUT Drawer Replacing Refrigerator Door Ta es TopIpprts Lower door into final position and tighten the screws HOW to Install Pull OUT DrawerFlat-head screwdriver for prying REMOVING,REVERSING and ReplacingRefrigerator Doors For Freezer Drawer Models Pin HOW to Reverse Door Handle For Freezer Swing Models HOW to Replace Refrigerator Freezer DoorsNo Phillips head screwdriver 4inch socket wrench Refrigerator Doors For Freezer Swing Models10mm or 13/32-inch socket wrench Pin Insert Bracket After Instructions below to align the doors After Completing the JOBLeveling and Door Closing Door AlignmentIdentify your control type Ensuring Proper AIR CirculationRefrigerator Adjusting Control SettingsStoring Frozen Food Food Storage GuideConvenience Shelves optional on some models Refrigerator ShelvesSliding Out Shelves optional on some models To remove a sliding shelf from its metal frameCrisper Humidity Control on some models Refrigerator FeaturesPantry On some modelsTo remove the crisper cover Crisper Cover with Lattice on InnerSurface on some models To remove the glassDoor Bins Door RacksDurabase Divider on some models Dairy BINEGG BOX on some models Durabase on some modelsTilting Door on some models Wire Durabase on some modelsHow to use GLIDE-OUT Drawer Basket on some modelsDoor Liners and Gaskets General Cleaning TipsLight Bulb Replacement OutsideIf you choose to leave the refrigerator on while you Power InterruptionsTo change the freezer light Preparing for Vacation When YOU should SET the Icemaker Power Switch to O OFFIcemaker Normal Sounds YOU MAY HearBefore YOU Begin Power drillTighten the Pipe Clamp Installation Instructions Choose the Valve LocationDrill the Hole for the Valve Fasten the Shut OFF ValveStart the Icemaker Connect the Tubing to the RefrigeratorTurn the Water on AT the Shut OFF Valve Plug in the RefrigeratorThen Refrigerator does not OperateVibration or Rattling Noise Check ifCheck if Then Compressor Motor Seems to RUN TOO MuchDoors will not Close Completely Frost or ICE Crystals on Frozen FoodDoors are Difficult to Open Refrigerator Seems to Make TOO Much NoiseCubes Produced by Icemaker are TOO Small Lights do not Work Automatic Icemaker does not WorkIiiiiiiiiiiiiiiiiiiiiiii
Top Page Image Contents