Setting the Controls, Dispenser, FunctionF -C

SETTING THE CONTROLS

Temperature

•Your refrigerator has a control pad on the dispenser that lets you regulate the temperature in the freezer and refrigerator compartments.

•Initially set the refrigerator control at 37°F (3°C) and the freezer control at O°F (-18°C). Leave it at this setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as desired.

•Every time you touch the freezer temperature adjust button, the temperature changes in a circulating order of "0" *"-1" *"-2" *"-3" *"-4" *"-6" *"8" *"6" *"5" *"4" *"3" * "2" *"1" *"0".

•Every time you touch the refrigerator temperature adjust

button, the temperature changes in a circulating order of "37" *"36" *"35" *"34" *"33" *"46" *"45" *"44" *"43"

"42" *"41" *"40" *"39" *"38" *"37".

Ultra Ice

•When you touch the "Ultra Ice" button, the graphic [ _ ] will light up in the display and it continues for 24hours. It will automatically shut off after 24hours have passed.

Or you can stop this function manually by touching the button one more time.

•This function increases both icemaking and freezing capabilities.

Dispenser

•You can select water, crushed ice, or

cubed ice by touching o,o,o,....button*, as you desire.

Filter

•Filter Reset : When the FILTER RESET icon turns on, you have to change the water filter. Press the FILTER RESET button for 3 seconds to turn the icon off. You need to change the water filter approximately every 6 months.

WARNING: If a door is open, the dispenser does not work.

Light / Light Sensor

•If the light is set "Auto" mode, dispenser light will automatically turn on and off according to the brightness of room detected by light sensor.

Alarm

•When the power is connected to the refrigerator, door alarm is initially set off and door alarm display will show

(]. When you touch _ button, the display will change to (_ and door alram function is now activated.

•When either refrigerator or the freezer door is left open for more than 60 seconds, the alarm will ding to let you know the door is open.

•When you close the door, the door alarm will stop dinging.

•If you want to disable the door alarm function, touch button then the door alarm display will switched to _.

Lock

•When the power is initially connected to the refrigerator, Lock function is off.

•If you want to activate Lock function to lock other

buttons, press and hold _ button for 3 seconds or more. i sign will be displayed and the Lock function is now enabled.

•No buttons other than _ button will work even

including dispenser button while Lock function is enabled.

• To disable the Lock function,	press and hold _	button
for 3 seconds or more.
Temperature Mode Switch	Function(°F <->°C)

• If you want to convert °F to °C or vice versa, press and

hold	Refrigerator	button simultaneously for 5
hold	button and _	button simultaneously for 5
seconds	or more.

It is recommended to hold your cup
for a couple of seconds after
.	_rl_!l
• Theredispensingbe.COuldsome dripping after	_rl_!l

NOTE : The dispenser is desinged not to operate while either refrigerator door is left open.

ENSURING PROPER AIR CIRCULATION

Do not block air channels with any objects or food for air

circulation to prevent food loss due to the lack of cooling air.