Kenmore 625.38575 owner manual RO Membrane Cartridge

Page 13

- CARE OF YOUR REVERSE OSMOSIS SYSTEM -

RO MEMBRANE CARTRIDGE

The life of the RO membrane cartridge depends mostly on the pH of the supply water to the RO sys-

tem (see specifications). Cartridge life is shorter with higher pH. For example, if supply water pH is flom 6.8 to 7.7, the cartridge may last for well over one yea1: How- eve_, cartridge life may be as short as 6 months if the pH

is as high as 8.5 to 10. Higher pH weakens the cartridge

membrane and causes pin-hole leaks.

It's time to replace the RO cartridge when the pro-

duction rate and/or quality of product water drops. Product water may begin to taste different or bad, in-

dicating solids and organics are passing through the

RO membrane. To be sure it is the RO cartridge, re-

place the prefilter and postfilter cartridges first.

To replace the RO cartridge (see Figure 10):

1.Turn off the water supply and open the RO faucet to relieve pressure.

2.Remove (turn to the left) the sump from the filter

head. Be careful...the sump is full of water.

3.Remove and discard the RO cartridge in a proper manner. Flush the insides of the sump with fresh wa- ter. Do not lose the large o-ring seals.

Note:

Sanitizing

is

recommended

 

after

servicing

in-

ner parts of the system (see page 9).

 

 

 

4. Insert

new

RO

cartridges

with

o-ring

seals

to-

wards

the

top,

and

with

lubricated

o-ring

in place,

turn

to the right to reattach

the sump.

 

 

 

S. Remove

and

replace batteries

to

reset

counter

and

timer.

(monitor

models).

 

 

 

 

 

 

6.Pu_ige the RO membrane cartridge following instruc- tions on page 9.

FLOW CONTROL

The flow control is vital for proper operation of the

RO membrane cartridge. The control keeps water

flow through the membrane at the needed rate to ob- tain the best quality product water.

Periodically check the flow control to be sure the

small hole through it is clean and unrestricted.

o-ring sen

let

col-

/

drain port

flow (control) insert

1/4" tubing

TO

DRAIN

Figure 11

13

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line

Image 13
Contents Model no Owners ManualSafety Guides WarrantyExcept filter Cartridges and R. O. membrane Before YOU Begin to Install the RO System Table of ContentsWhat Your Reverse Osmosis System will do Steps to Install Where to Install the RO SystemTools and Materials Needed Water Supply Fitting Optional Pipe Fittings Install Cold Water Supply FittingInstall Faucet Install Drain AdapterRO Assembly InstallAssemble Faucet Connect Drain TUBING, Faucet to Install Storage TANK, Make Remaining Tubing ConnectionsPressure Testing SANITIZING, Pressure Testing & PurgingHOW Your Reverse Osmosis System Works Care of Your Reverse Osmosis System Reverse Osmosis Water Flow SchematicPoetfilter Prefilter and Post Filter CartridgesRO Membrane Cartridge Plunger Automatic Shutoff ServiceModel no Reverse Osmosis System Care GuideMetric Dimensions and SpecificationsStorage Tank not shown Remote Installation LocationsRepair Parts Key Key Part Description of Part NumberOur Home Your Home

625.38575 specifications

The Kenmore 625.38575 is a highly regarded model in the line of portable air compressors, designed to meet the diverse needs of DIY enthusiasts and professionals alike. With a powerful performance and a range of features, this compressor stands out for its reliability and efficiency.

One of the main characteristics of the Kenmore 625.38575 is its robust motor, which typically operates at 1.5 HP. This ensures that the compressor can tackle a variety of tasks, from inflating tires to powering pneumatic tools. The oil-free pump design not only minimizes maintenance but also allows for a cleaner and quieter operation, making it ideal for indoor use or in residential areas where noise can be a concern.

The compressor offers a maximum pressure of around 125 PSI, which is sufficient for most applications. Additionally, the unit boasts a high volume output, with a flow rate close to 2.5 CFM at 90 PSI, allowing for quick recovery times and the ability to run multiple tools simultaneously without significant drops in pressure.

In terms of durability, the Kenmore 625.38575 features a reinforced frame and a sturdy handle for portability, ensuring that it can withstand the rigors of different job sites. The unit is also equipped with rubber feet to reduce vibrations and prevent slipping during operation.

Safety features are prominent in this model as well. The compressor includes an automatic shut-off function that prevents overheating and extends the life of the motor. The pressure gauge is easy to read, providing users with accurate pressure readings to adjust their settings as needed.

Another noteworthy aspect of the Kenmore 625.38575 is its user-friendly design. The onboard storage for accessories and hose makes it easy to keep everything organized and within reach. Overall, the Kenmore 625.38575 is an effective and versatile air compressor that delivers power and convenience, making it a popular choice for both home improvement projects and professional use. Its combination of efficiency, durability, and ease of use makes it a valuable tool in any workshop or garage.