Kenmore 625.38575 Where to Install the RO System, Tools and Materials Needed, Steps to Install

- WHERE TO INSTALL THE RO SYSTEM -

The RO assembly and storage tank is designed for

installation under the sink, usually in the kitchen or

bathroom. The RO assembly mounts on a wall sur- face, or can lay on the cabinet floor next to the storage tank. Hanger washers and wood screws are included

for cabinet wall mounting. The RO product water

faucet installs on the sink, or on the countertop next to the sink (page 6).

Note: Tubing lengths allow for the removal of the as- sembly from the hanger washers for servicing. If tub-

ing lengths are shortened for neater appearance, it

may be necessary to keep the assembly on the hanger

washers for service.

You can also locate the R© assembly and storage tank

in any remote location from the faucet, observing safety guides on page 2. You do need a nearby water source and drain point (see page 17).

Water Supply: To provide supply water to the RO

system inlet use the included feed supply fitting or

install pipe fittings for tubing connection, as typical- ly shown on page 5.

Drain Point: A suitable drain point is needed for re-

ject water from the RO membrane. A floor drain,

laundry tub, standpipe, sump, etc., is preferred, as

shown in the remote locations drawing, page 17. A

sink p-trap drain adaptor is included to install where

codes permit, as an optional drain point (page 6).

adapter

HOT 'CTLi/

/

		sink drain		RO Assembly
		p-trap
Figure	2
	- TOOLS AND MATERIALS NEEDED -
• adjustable wrench, standard		pliers, and	larger	• electric	drill and bits, if hole is needed for the RO
adjustable	jaw pliers or pipe wrench	to fit sink	drain	faucet, page	6.

slotted and Phillips head screwdrivers

plumbers putty

- 6 STEPS TO INSTALL -

STEP 1: - Install Cold Water Supply fittings

STEP 2: - Install Drain Adapter

STEP 3: - Install Faucet

STEP 4: - Install RO Assembly

STEP 5: - Install Storage Tank, Make Remaining Tub- ing Connections

STEP 6: - Sanitizing, Pressure Testing, Purging

4

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line