Kenmore 625.38575 owner manual Install Storage TANK, Make Remaining Tubing Connections

Page 8

-STEP 5: INSTALL STORAGE TANK, MAKE REMAINING TUBING CONNECTIONS -

1. CONNECT DRAIN TUBING, FAUCET TO

DRAIN ADAPTER: Referring to Figure 8, run the loose section of black 3/8" tubing from the faucet to

the drain adapter, with a black collet, installed on

page 6. Cut this tubing as needed to route in as

straight of a run as possible, without loops, dips, low spots or kinks. Cut the end of the tubing square. Then push all the way into the fitting. Pull on the tub- ing to be sure it's held firmly in the adapter fitting.

See page 14 for tubing connection instructions.

2. CONNECT TUBING TO WATER SUPPLY: Con- nect the feed (green) tube to the water supply fitting

installed on page 5. Connection to the fitting is as

described in Figure 12, page 14.

3.Move the storage tank into place next to the RO as-

sembly. You can stand the tank upright, or lay it on side. Apply no more than two wraps of Teflon tape

to the threads on the nipple at the top of the tank.

Hand tighten the other included tubing adapter fit-

ting with the yellow collet onto the tank nipple, then

wrench 1/4 turn only. BE CAREFUL NOT TO CROSS THREAD.

4.Run the 3/8" yellow tubing to the fitting installed in step 3. Be sure the end of the tubing is cut square, and insert all the way into the fitting. Again, pull on the tubing to be sure it's held firmly in the fitting.

TYPICAL UNDERSINK INSTALLATION

 

 

TUBING

 

water supply

 

 

 

fitting

drain

 

 

 

 

 

 

adapter

 

telephone

 

HOT COLD

_&,,

style cable

 

sink p-trap

 

 

tubing adaptor

yellow collet

 

 

Note: See note on page 4 regarding tubing lengths.

Figure 8

8

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Owners Manual Model noExcept filter Cartridges and R. O. membrane WarrantySafety Guides What Your Reverse Osmosis System will do Table of ContentsBefore YOU Begin to Install the RO System Tools and Materials Needed Where to Install the RO SystemSteps to Install Install Cold Water Supply Fitting Water Supply Fitting Optional Pipe FittingsInstall Drain Adapter Install FaucetAssemble Faucet InstallRO Assembly Install Storage TANK, Make Remaining Tubing Connections Connect Drain TUBING, Faucet toSANITIZING, Pressure Testing & Purging Pressure TestingHOW Your Reverse Osmosis System Works Reverse Osmosis Water Flow Schematic Care of Your Reverse Osmosis SystemPrefilter and Post Filter Cartridges PoetfilterRO Membrane Cartridge Automatic Shutoff Service PlungerReverse Osmosis System Care Guide Model noDimensions and Specifications MetricRemote Installation Locations Storage Tank not shownRepair Parts Key Part Description of Part Number KeyYour Home Our Home

625.38575 specifications

The Kenmore 625.38575 is a highly regarded model in the line of portable air compressors, designed to meet the diverse needs of DIY enthusiasts and professionals alike. With a powerful performance and a range of features, this compressor stands out for its reliability and efficiency.

One of the main characteristics of the Kenmore 625.38575 is its robust motor, which typically operates at 1.5 HP. This ensures that the compressor can tackle a variety of tasks, from inflating tires to powering pneumatic tools. The oil-free pump design not only minimizes maintenance but also allows for a cleaner and quieter operation, making it ideal for indoor use or in residential areas where noise can be a concern.

The compressor offers a maximum pressure of around 125 PSI, which is sufficient for most applications. Additionally, the unit boasts a high volume output, with a flow rate close to 2.5 CFM at 90 PSI, allowing for quick recovery times and the ability to run multiple tools simultaneously without significant drops in pressure.

In terms of durability, the Kenmore 625.38575 features a reinforced frame and a sturdy handle for portability, ensuring that it can withstand the rigors of different job sites. The unit is also equipped with rubber feet to reduce vibrations and prevent slipping during operation.

Safety features are prominent in this model as well. The compressor includes an automatic shut-off function that prevents overheating and extends the life of the motor. The pressure gauge is easy to read, providing users with accurate pressure readings to adjust their settings as needed.

Another noteworthy aspect of the Kenmore 625.38575 is its user-friendly design. The onboard storage for accessories and hose makes it easy to keep everything organized and within reach. Overall, the Kenmore 625.38575 is an effective and versatile air compressor that delivers power and convenience, making it a popular choice for both home improvement projects and professional use. Its combination of efficiency, durability, and ease of use makes it a valuable tool in any workshop or garage.
Top Page Image Contents