English
Stewing |
| Steaming | |
| Place the appliance on a flat, even surface. | ||
Place the appliance on a flat, even surface. |
| ||
| Open the lid (1) by pressing the lid release | ||
Open the lid (1) by pressing the lid release |
| button (3). Remove the cooking bowl (8) | |
button (3). Add the required ingredients & |
| from the appliance. | |
water to the cooking bowl (8). Check that |
| Place the steam tray (11) into the cooking | |
the outside of the bowl is dry then place it |
| ||
| bowl & add water until it is just below the | ||
into the appliance, rotating the bowl to |
| ||
| top of the steam tray. Remove the steam | ||
ensure correct contact with the cooking |
| ||
| tray. | ||
plate. Close the lid. |
| ||
| Check that the outside of the bowl is dry | ||
Fit the cord set (28) into the appliance inlet |
| ||
| then place it into the appliance, rotating the | ||
(29) & connect the appliance to a suitable |
| ||
| bowl to ensure correct contact with the | ||
electrical supply. |
| ||
| cooking plate. | ||
The Rice Cooker will enter “Stand By” |
| ||
| Dry the steam tray and place the ingredients | ||
mode, and the LCD display (4) will show a |
| ||
| evenly on top. Place the loaded tray into the | ||
green background for approximately 30 |
| ||
| cooking bowl. | ||
seconds. A yellow lamp in the Start / |
| ||
| Close the lid. | ||
Reheat Button (15) will flash until a cooking | |||
Fit the cord set (28) into the appliance inlet | |||
mode is selected. |
| ||
Press the Function Button (13) seven times. | (29) & connect the appliance to a suitable | ||
electrical supply. | |||
A small arrow in the LCD Display will |
| ||
| The Rice Cooker will enter “Stand By” | ||
indicate that “Stewing” is the selected |
| ||
cooking mode (24). |
| mode, and the LCD display (4) will show a | |
The default cooking time for Stewing is 2 |
| green background for approximately 30 | |
| seconds. A yellow lamp in the Start / Reheat | ||
hours. |
| ||
| Button (15) will flash until a cooking mode is | ||
To adjust this, press the “Timer” button (18), | |||
selected. | |||
then press the “Hour” and “Minute” buttons | Press the Function Button (13) eight times. | ||
to select the required cooking time. |
| ||
| The small arrow in the LCD display will | ||
Press the Start / Reheat Button (15). The |
| ||
| indicate that “Steaming” is the selected | ||
yellow lamp in the button will stay lit during |
| ||
| cooking mode (25). | ||
cooking. The LCD will display "0", and |
| ||
| The default cooking time for Steaming is | ||
count up during cooking. |
| ||
| 5minutes. | ||
Note: The maximum cooking time for |
| ||
| To adjust this, press the “Timer” button (18), | ||
“Stewing” is 20 hours. |
| ||
| then press the “Hour” and “Minute” buttons | ||
When the stew is cooked, the appliance will | |||
to select the required cooking time. | |||
emit a series of beeps. |
| Press the Start / Reheat Button (15). The | |
The appliance has entered the “Keep |
| ||
| yellow lamp in the button will stay lit during | ||
Warm” mode when the Start / Reheat |
| ||
| cooking. The LCD will display "0", and | ||
button lamp goes out, and the yellow lamp |
| ||
| count up during cooking. | ||
in the “Keep Warm / Cancel” button lights |
| ||
| Note: The maximum cooking time for | ||
up. The background of the LCD will also |
| ||
| “Steaming” is 50 minutes. | ||
change to orange. |
| ||
| When the ingredients are cooked, the | ||
Should the water dry out before cooking is |
| ||
| appliance will emit a series of beeps. | ||
completed, the appliance will emit a series |
| ||
| The appliance has entered the “Keep | ||
of beeps & automatically switch to “Keep |
| ||
Warm” mode. |
| Warm” mode when the Start / Reheat | |
Note: Steam may be released when the lid |
| button lamp goes out, and the yellow lamp | |
| in the “Keep Warm / Cancel” button lights | ||
is lifted. |
| ||
| up. The background of the LCD will also | ||
The food can be transferred to bowls using |
| ||
| change to orange. | ||
a ladle. |
| ||