Ward's GIL-39012B manual Beforestarting, Recommendedsae Viscositygrades, To Fill Crankcasewith OIL

SPARKPLUG

TO BATTERY -

VIA STARTER

SWITCH

ELECTRIC

STARTER

MOTOR

TO BATTERY_

VIA AMMETER

IF FURNISHED

CYLINDER

110 VOLT STARTER

BEFORESTARTING

READTHE OPERATINGINSTRUCTIONSOF THE EOUIPMENTTHIS ENGINEPOWERS

Use a high qualitydetergentoil classified"For ServiceSC, SD, SE or MS . "Detergentoils keepthe engineileaner and retardthe formationof gum and varnishdeposits .Nothing should be added to the recommendedoil .

RECOMMENDEDSAE VISCOSITYGRADES

'lfnotavailable,syntheticoil maybeusedhaving5W-20,5W-30 or 5W-40viscosity.

TO FILL CRANKCASEWITH OIL

Place engine level. Clean area around oil fill before removingoil fill plug or oil minder .

OIL FILL PLUG Remove oil fill plug or (optional) oil - minder. Fill crankcase to point of overflowing. POUR SLOWLY.Capacity17rpints (0.6iiters).Replaceoilfill plug or oil - minder .

OIL FILL PLUG

FORM NO. 270106-3/79

PRINTEDIN U . S . A .

EXTENDEDOILFILL.(Optional)Removecapanddipstick. FILL.TO FULL MARK on dipstick,POUR SLOWLY. Capacity1%pints (0.6liters).Whencheckingoil level, screwdipstickassemblyfirmlybutslowlyuntilcapbottoms on tube.DO NOTOVERFILLDipstick.assemblymustbe securelyassembledto tube at all timeswhen engineis operating.

EXTENDEDOIL FILL

CHARGE BATTERY

Charge battery before use on engines equipped with (OPTIONAL) 12V electric starter motor. See equipment manufacturers recommendations.

FILL FUEL TANK

Use clean, fresh "regular, low-lead or lead-free" grade gasoline .DO NOT MIX OIL WITH GASOLINE .