Murray 425015x92A manual HOW to Remove the Mower Housing, HOW to Install the Mower Housing

Page 26

MAINTENANCE

HOW TO REMOVE THE MOWER HOUSING

1.Move the blade rotation control to the DISENGAGE position.

2.If equipped, remove the gauge wheels.

3.Move the lift lever to the level

adjustment position(Figure 22).

WARNING: The lift lever is spring loaded. Make sure the lift lever is locked in the LEVEL ADJUST- MENT position.

4. Remove the hair pins and the

 

 

washers from the adjuster

 

 

arms (Figure 23). See illustra-

Level Adjustment

 

tions “C” and “D”.

 

Position

Figure 22

 

5.Remove the hair pins and washers from the suspension links. See illustrations “A” and “B”.

6.Disconnect the extension spring from the blade control rod. See illustration “E”.

7.Disconnect the front hanger from the axle support. See illustration “F”.

8.Remove the mower drive belt from the stack pulley.

9.Pull the mower housing away from the right side of the unit.

10.To operate without the mower housing, move the lift lever to the TOP position.

HOW TO INSTALL THE MOWER HOUSING

1.Push the mower housing under the right side of the unit.

2.Put the mower drive belt around the stack pulley. Make sure the “V” side of the mower drive belt is against the stack pulley. Also, make sure the mower drive belt is not twisted.

3.Attach the front hanger to the axle support with the hanger rod. Fasten with the fasteners as shown. See illustration “F”.

4.Make sure the mower drive belt is between the stack pulley and the two belt guides. See illustration “G”.

5.Attach the suspension links to the lifter assembly. Fasten with the washers and hair pins. See illustrations “A” and “B”.

6.Attach the right and the left adjuster arms to the suspension brackets. Fasten with the washers and hair pins. See illustra- tions “C” and “D”.

7.Attach the extension spring to the blade control rod. See illustration “E”.

8.Move the blade rotation control to the ENGAGE position. Make sure the mower drive belt is inside all the belt guides.

9.Make sure the mower housing is level. See the instructions on “How To Level The Mower Housing”.

10.If equipped, install the gauge wheels.

11.Check the operation of the blade rotation control. See the in- structions on “How To Adjust The Blade Rotation Control”.

A

 

Lift Lever

 

 

 

 

 

Suspension

Stack Pulley

 

 

Link

Blade Rotation

 

 

 

 

 

 

Control

 

B

 

Belt

Belt

 

 

 

 

Guide

 

 

Guide

 

 

 

 

 

Mower Drive Belt

Suspension

A

 

 

Link

Lifter

 

Adjuster

 

 

Arm

 

Assembly

 

 

 

 

 

B

 

A

 

 

 

 

 

 

B

 

 

 

Blade

 

Adjuster

 

Control Rod

 

Arm

Hanger Rod

 

 

 

 

 

 

Extension

 

 

 

Spring

 

A

 

 

 

B

 

 

 

 

 

Front Hanger

 

 

Gauge Wheel

Mower Drive Belt

Figure 23

 

 

F–040734L

 

26

 

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model Table of Contents OWNER’S Information Environmental AwarenessII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Steps to Follow Before MowingInternational Pictorials Safety Warning PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Assemble the Gauge Wheels HOW to Install the SeatHOW to Assemble the Steering Wheel HOW to Install the Battery Cables Maintenance Free BatteryHOW to Charge Maintenance Free Battery IMPORTANT! Before YOU Start Mowing HOW to Prepare the EngineCheck the Level of the Mower Housing Check the TiresLift Lever OperationLocation of Controls Attachments HOW to USE THROTTLE/CHOKE ControlHOW to USE the Shift Lever See the Instruction Book for the AttachmentHOW to Stop the Unit HOW to SET the Parking BrakeHOW to Change the Cutting Height HOW to Transport the UnitHOW to Operate with the Mower Housing HOW to Operate the Unit on HillsCarburetor HOW to Start the EngineBefore Starting the Engine Operating Tips Mowing and Bagging TipsHOW to Check the Muffler MaintenanceFrequency Maintenance Required Comments General RecommendationsInspect Blade HOW to Remove and Install the BladeHOW to Sharpen the Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Clutch HOW to Check and Adjust the Drive BrakeHOW to Adjust the Shift Lever Disconnect the adjuster nut from the shifter bracket FigureWhere to Lubricate HOW to Check the Fuel FilterHOW to Remove the Mower Housing HOW to Install the Mower HousingHOW to Adjust the Gauge Wheels HOW to Level the Mower Housing HOW to Replace Motion Drive Belt RemovalInstallation HOW to Replace the Mower Drive Belt HOW to Install the Wheels Front WheelHOW to Clean the Mower Housing HOW to Replace the FuseHOW to Replace the Light Bulb BatteryTrouble Shooting Chart 040734L USARepair Parts Chassis & HoodKey Description Motion Drive Motion Drive Steering Key Part Description Repair Parts Mower Housing Suspension Mower Housing Suspension Mower Housing Complete Mower Housing Assy Repair Parts Engine Mount Engine Mount Electrical System Light HarnessElectrical System 040734L Index Model No Model No Bushel Capacity

425015x92A specifications

Murray 425015x92A is a state-of-the-art piece of equipment showcasing advanced engineering and innovative technologies designed for optimal performance in various applications. This model is distinguished by its robust build and versatile functionality, making it an ideal choice for both industrial and commercial sectors.

One of the key features of the Murray 425015x92A is its high-efficiency motor. The motor is designed to minimize energy consumption while maximizing output, which not only lowers operational costs but also contributes to sustainability efforts. Coupled with an advanced cooling system, the motor maintains optimal operating temperatures, ensuring reliability and longevity.

The device is equipped with smart technology that enhances its performance. This includes an intuitive control panel that allows users to easily monitor and adjust settings according to their needs. With digital displays and user-friendly interfaces, operators can quickly access real-time data and make informed decisions on performance optimization.

In terms of safety features, the Murray 425015x92A integrates several protective mechanisms. These include overload protection, emergency shut-off switches, and safety interlocks that prevent accidental operation. Such features ensure that both the equipment and its operators remain safe during use.

Durability is another characteristic that sets the Murray 425015x92A apart from its competitors. Constructed with high-grade materials and components, it is designed to withstand harsh working environments. It can resist dust, moisture, and other environmental factors, making it suitable for use in various conditions, from manufacturing floors to outdoor job sites.

The versatility of the Murray 425015x92A is also noteworthy. It can be configured for multiple applications, from heavy-duty industrial tasks to lighter commercial projects. Its adaptable design allows for quick modifications, increasing its utility across different fields.

Additionally, the equipment is backed by a comprehensive support system. Murray provides extensive customer service, including installation assistance, technical support, and maintenance options. This commitment to customer satisfaction ensures that users can rely on their equipment for sustained performance.

In conclusion, the Murray 425015x92A is an exemplary model reflecting a blend of efficiency, safety, and versatility. With its advanced technologies and robust construction, it stands as a valuable asset for diverse applications across various industries, making it a preferred choice for professionals seeking reliability and performance.
Top Page Image Contents