Murray 425015x92A manual Steps to Follow, Before Mowing

Page 8

STEPS TO FOLLOW

BEFORE MOWING

FBe sure to dress correctly. Wear hard shoes, not sandals or tennis shoes.

FExamine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade.

FFill the fuel tank outside. Clean off spilled fuel.

FRead and follow the Owner’s Manual, the instructions with the engine, and the instructions with any attachments. Owner’s Manual instructions are for your safety and the safety of others.

FExhaust fumes are dangerous. Start the engine outside.

FMake sure all safety devices are in place and working correctly.

FOperation of the mower is only for a person that has experience.

FWet grass can be dangerous. Let the grass dry.

FInstruct children and others to keep away from the work area.

FNever cut the grass without good light.

FPick up loose objects. Remove them from the mowing area.

WHILE MOWING

FWatch for fixed objects and avoid them. They can damage the mower or cause injury.

FA hot engine, muffler, and transmission will cause a burn. Do not touch.

FInclines and slopes must be carefully mowed. See the “Guide” in the back of this book to check a slope.

FLack of daylight or good artificial light is cause to stop mowing.

FExamine the mower, the blade, and other parts for damage after hitting a foreign object or if the unit vibrates excessively.

FDo not make adjustments or repairs without stopping the engine. Disconnect the spark plug wire.

FOn or near roads, watch out for traffic. Direct discharge away from roads.

FWhen mowing, avoid areas where traction is unsure. Look back before changing direction of travel.

FIn heavy grass, raise the cutting height. Cut slower. Stop the engine to remove clogged grass from the mower.

FNever remove any safety related parts.

FDo not pour gasoline into a engine that is hot or running.

AFTER MOWING

FAlways let the mower cool before storing in an enclosed area.

FForeign material on the mower is dangerous. Clean off grass, leaves, grease and oil before storing.

FTighten all loose nuts, bolts and screws before you use the unit.

FEmpty and clean any grass catcher or other accessory.

FRemove the key or disconnect the spark plug wire to prevent unauthorized use.

FMake sure the mower is not kept near a source of ignition. Gas fumes can cause an explosion.

FOnly original parts or factory approved substitutes can be used to service the mower.

FWhen storing the mower for an extended period, remove the fuel from the fuel tank.

FInstruct children to leave the mower alone. It is not a toy.

FNever keep gasoline near a source of ignition. Always use an approved container. Keep gasoline away from children.

FLubricate according to the Instruction Book. See “Lubrication”.

IMPORTANT––Read the Instruction Book. Keep this book for future use and reference.

WARNING: Look for this symbol to point out important

safety precautions. It means: “Attention! Become Alert! Your Safety Is Involved.”

F–040734L

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model Table of Contents OWNER’S Information Environmental AwarenessII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Steps to Follow Before MowingSafety Warning Pictorials International PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Assemble the Gauge Wheels HOW to Install the SeatHOW to Assemble the Steering Wheel HOW to Install the Battery Cables Maintenance Free BatteryHOW to Charge Maintenance Free Battery HOW to Prepare the Engine Check the Level of the Mower HousingIMPORTANT! Before YOU Start Mowing Check the TiresLift Lever OperationLocation of Controls HOW to USE THROTTLE/CHOKE Control HOW to USE the Shift LeverAttachments See the Instruction Book for the AttachmentHOW to SET the Parking Brake HOW to Change the Cutting HeightHOW to Stop the Unit HOW to Transport the UnitHOW to Operate with the Mower Housing HOW to Operate the Unit on HillsCarburetor HOW to Start the EngineBefore Starting the Engine Operating Tips Mowing and Bagging TipsMaintenance Frequency Maintenance Required CommentsHOW to Check the Muffler General RecommendationsInspect Blade HOW to Remove and Install the BladeHOW to Sharpen the Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Clutch HOW to Check and Adjust the Drive BrakeHOW to Adjust the Shift Lever Disconnect the adjuster nut from the shifter bracket FigureWhere to Lubricate HOW to Check the Fuel FilterHOW to Remove the Mower Housing HOW to Install the Mower HousingHOW to Adjust the Gauge Wheels HOW to Level the Mower Housing HOW to Replace Motion Drive Belt RemovalInstallation HOW to Replace the Mower Drive Belt HOW to Install the Wheels Front WheelHOW to Replace the Fuse HOW to Replace the Light BulbHOW to Clean the Mower Housing BatteryTrouble Shooting Chart 040734L USARepair Parts Chassis & HoodKey Description Motion Drive Motion Drive Steering Key Part Description Repair Parts Mower Housing Suspension Mower Housing Suspension Mower Housing Complete Mower Housing Assy Repair Parts Engine Mount Engine Mount Electrical System Light HarnessElectrical System 040734L Index Model No Model No Bushel Capacity

425015x92A specifications

Murray 425015x92A is a state-of-the-art piece of equipment showcasing advanced engineering and innovative technologies designed for optimal performance in various applications. This model is distinguished by its robust build and versatile functionality, making it an ideal choice for both industrial and commercial sectors.

One of the key features of the Murray 425015x92A is its high-efficiency motor. The motor is designed to minimize energy consumption while maximizing output, which not only lowers operational costs but also contributes to sustainability efforts. Coupled with an advanced cooling system, the motor maintains optimal operating temperatures, ensuring reliability and longevity.

The device is equipped with smart technology that enhances its performance. This includes an intuitive control panel that allows users to easily monitor and adjust settings according to their needs. With digital displays and user-friendly interfaces, operators can quickly access real-time data and make informed decisions on performance optimization.

In terms of safety features, the Murray 425015x92A integrates several protective mechanisms. These include overload protection, emergency shut-off switches, and safety interlocks that prevent accidental operation. Such features ensure that both the equipment and its operators remain safe during use.

Durability is another characteristic that sets the Murray 425015x92A apart from its competitors. Constructed with high-grade materials and components, it is designed to withstand harsh working environments. It can resist dust, moisture, and other environmental factors, making it suitable for use in various conditions, from manufacturing floors to outdoor job sites.

The versatility of the Murray 425015x92A is also noteworthy. It can be configured for multiple applications, from heavy-duty industrial tasks to lighter commercial projects. Its adaptable design allows for quick modifications, increasing its utility across different fields.

Additionally, the equipment is backed by a comprehensive support system. Murray provides extensive customer service, including installation assistance, technical support, and maintenance options. This commitment to customer satisfaction ensures that users can rely on their equipment for sustained performance.

In conclusion, the Murray 425015x92A is an exemplary model reflecting a blend of efficiency, safety, and versatility. With its advanced technologies and robust construction, it stands as a valuable asset for diverse applications across various industries, making it a preferred choice for professionals seeking reliability and performance.
Top Page Image Contents