Toro 20200, 20199 owner manual Side-discharging the Clippings, Removing the Grass Bag

Page 14

Figure 26

1. Bag rod

2. Notch (2)

4. Lower the rear deflector until it rests on the grass bag.

Removing the Grass Bag

To remove the bag, reverse the steps in Installing the Grass Bag above.

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.

If the bag is on the machine, remove it and insert the rear-discharge plug; refer to (page 9) before side-discharging the clippings.

Important: Ensure that the rear-discharge plug is in place before you recycle the clippings (Figure 24).

WARNING

The blade is sharp; contacting the blade can result in serious personal injury.

Stop the engine and wait for all moving parts to stop before leaving the operating position.

Installing the Side-discharge Chute

With the chute in your right hand:

1. Lift open the side-discharge deflector (Figure 27).

Figure 27

1. Side-discharge deflector

2. Side-discharge chute

2.Install the side-discharge chute as shown in

Figure 27 and Figure 28, and close the deflector onto the chute.

Figure 28

Removing the Side-discharge Chute

To remove the side-discharge chute, reverse the steps in Installing the Side-discharge Chute above.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Introduction TimeMaster 30in Lawn MowerSlope Operation SafetyGeneral Operation Children ServiceGeneral Service Safe Handling of GasolineSafety and Instructional Decals 114-7982Assembling the Handle SetupNo Parts Required Procedure Filling the Engine with Oil Installing the Blade-control BarParts needed for this procedure Charging the Battery Product OverviewBefore Starting Recommended Fuel Using Fuel Stabilizer/ConditionerOperation Filling the Fuel TankAdjusting the Cutting Height Checking the Engine Oil LevelStandard Model Adjusting the Handle HeightStarting the Engine Electric-start ModelEngaging the Blade Using the Self-propel DriveStopping the Engine Disengaging the Blade Using the Grass BagNot Using the Grass Bag Checking the Blade-stop System OperationBagging the Clippings Installing the Grass BagRecycling the Clippings Removing the Grass Bag Installing the Side-discharge ChuteSide-discharging the Clippings Removing the Side-discharge ChuteCutting Grass Operating TipsGeneral Mowing Tips Cutting LeavesPreparing for Maintenance MaintenanceRecommended Maintenance Schedules Servicing the Air Filter Changing the Engine OilService Interval Every 25 hours Installing the New Battery Replacing the BatteryRemoving the Old Battery Replacing the FuseAdjusting the Self-propel Drive Cable Servicing the Blade-drive SystemInspecting the Blades Preparing to Service the Cutting BladesServicing the Cutting Blades Checking for Bent Blades Removing the BladesInstalling the Blades Washing Underneath the Machine Preparing the Fuel System StorageGeneral Information Preparing the EnginePage Page Toro Total Coverage Guarantee

20199, 20200 specifications

The Toro 20200 and 20199 are two versatile and innovative products designed to enhance landscaping and maintenance tasks for both professionals and homeowners. These models offer a range of features and technologies that cater to various needs, making them a top choice for turf care.

One of the primary features of the Toro 20200 is its efficient 21-inch cutting deck. This deck size provides the perfect balance between maneuverability and cutting efficiency, allowing users to tackle both small and medium-sized yards with ease. The 20199 model boasts similar dimensions, ensuring it can fit into tight spaces while still covering considerable ground.

Both models are equipped with Toro's proprietary Recycler cutting system. This technology allows for superior mulching capabilities, ensuring grass clippings are finely shredded and distributed back onto the lawn. This process not only enhances the appearance of the lawn but also contributes to its health by returning essential nutrients to the soil.

The power behind the Toro 20200 and 20199 comes from their robust engines. Both models utilize efficient gas engines that deliver ample power for cutting through tough grass, while also being designed for fuel efficiency. This ensures longer run times between refueling, saving both time and energy for users.

Ease of use is a hallmark of the Toro brand, and these models exemplify that. The self-propelled drive system on both the 20200 and 20199 models simplifies operation by allowing users to set their walking pace, making mowing less strenuous. Additionally, the adjustable cutting heights provide versatility for various grass types, ensuring optimal results throughout the growing season.

Durability is another key characteristic, with both models featuring sturdy construction to withstand the rigors of regular use. This durability is complemented by Toro's commitment to customer support, ensuring that users can rely on their equipment for years to come.

In summary, the Toro 20200 and 20199 are exceptional lawn mowers that combine efficiency, power, and user-friendly features. With their advanced technologies and robust design, these models stand out in the marketplace, making lawn care an achievable task for everyone, from novice gardeners to seasoned landscapers. Whether for residential or commercial use, these mowers offer reliability and performance to keep lawns looking their best.
Top Page Image Contents