Checking the Engine Oil Level

Service Interval: Before each use or daily

Max. fill: 20 oz. (0.59 l), type: SAE 30 detergent oil with an API service classification of SF, SG, SH, SJ, SL, or higher.

1.Move the machine to a level surface.

2.Remove the dipstick (Figure 12).

Figure 12

3.Wipe off the dipstick end with a clean cloth.

4.Insert the dipstick into the oil-fill tube and screw it in until it stops. (Figure 12).

5.Remove the dipstick and read the oil level; refer to Figure 13.

Figure 13

1. The oil level is too low;	3. The oil level is correct.
add oil to the crankcase.

2.The oil level is too high; remove oil from the crankcase.

•If the oil level is too low, add a small amount of oil slowly to the oil-fill tube, and then repeat steps 3 through 5 until the oil level is correct as shown in Figure 7.

•If the oil level is too high, drain the excess oil until you obtain the correct oil level on the dipstick; to drain the excess oil, refer to Changing the Engine Oil (page 17).

Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine.

6. Install the dipstick securely by hand.

Adjusting the Cutting Height

WARNING

Adjusting the cutting height may bring you into contact with the moving blades, causing serious injury.

•Stop the engine and wait for all moving parts to stop.

•Do not put your fingers under the housing when adjusting the cutting height.

Adjust the cutting height as desired; refer to Figure 14 and Figure 15.

Note: To raise the machine, move the front and rear cutting height levers forward; to lower the machine, move the cutting height levers rearward. Set the front and rear wheels to the same height unless special circumstances require otherwise; refer to Cutting Grass and Cutting Leaves in Operating Tips (page 15).

Figure 14

Front cutting-height lever

1.	1 inch (2.5 cm)	5.	3 inches (7.6 cm))
2.	1-1/2 inches (3.8 cm)	6.	3-1/2 inches (8.9 cm))
3.	2 inches (5.1 cm)	7.	4 inches (10.2 cm)

4.2-1/2 inches (6.4 cm)

20199, 20200 specifications

The Toro 20200 and 20199 are two versatile and innovative products designed to enhance landscaping and maintenance tasks for both professionals and homeowners. These models offer a range of features and technologies that cater to various needs, making them a top choice for turf care.

One of the primary features of the Toro 20200 is its efficient 21-inch cutting deck. This deck size provides the perfect balance between maneuverability and cutting efficiency, allowing users to tackle both small and medium-sized yards with ease. The 20199 model boasts similar dimensions, ensuring it can fit into tight spaces while still covering considerable ground.

Both models are equipped with Toro's proprietary Recycler cutting system. This technology allows for superior mulching capabilities, ensuring grass clippings are finely shredded and distributed back onto the lawn. This process not only enhances the appearance of the lawn but also contributes to its health by returning essential nutrients to the soil.

The power behind the Toro 20200 and 20199 comes from their robust engines. Both models utilize efficient gas engines that deliver ample power for cutting through tough grass, while also being designed for fuel efficiency. This ensures longer run times between refueling, saving both time and energy for users.

Ease of use is a hallmark of the Toro brand, and these models exemplify that. The self-propelled drive system on both the 20200 and 20199 models simplifies operation by allowing users to set their walking pace, making mowing less strenuous. Additionally, the adjustable cutting heights provide versatility for various grass types, ensuring optimal results throughout the growing season.

Durability is another key characteristic, with both models featuring sturdy construction to withstand the rigors of regular use. This durability is complemented by Toro's commitment to customer support, ensuring that users can rely on their equipment for years to come.

In summary, the Toro 20200 and 20199 are exceptional lawn mowers that combine efficiency, power, and user-friendly features. With their advanced technologies and robust design, these models stand out in the marketplace, making lawn care an achievable task for everyone, from novice gardeners to seasoned landscapers. Whether for residential or commercial use, these mowers offer reliability and performance to keep lawns looking their best.