Toro 20200, 20199 owner manual Installing the Blade-control Bar, Filling the Engine with Oil

Page 6

2

Installing the Blade-control Bar

No Parts Required

Procedure

Install the blade-control bar into the upper handle (Figure 5).

Figure 5

3

Filling the Engine with Oil

Parts needed for this procedure:

20 fl.

Engine oil

oz.

 

 

 

Procedure

Important: This machine does not come with oil in the engine. Before starting the engine, fill the engine with oil.

1.Move the machine to a level surface.

2.Remove the dipstick (Figure 6) and pour about 3/4 of the crankcase capacity of oil into the oil-fill tube.

Note: Max. fill: 20 oz. (0.59 l), type: SAE 30 detergent oil with an API service classification of SF, SG, SH, SJ, SL, or higher.

Figure 6

3.Wipe off the dipstick end with a clean cloth.

4.Insert the dipstick into the oil-fill tube, and screw it in until it stops.

5.Remove the dipstick and read the oil level on the dipstick; refer to Figure 7.

Figure 7

1. The oil level is too low;

3. The oil level is correct.

add oil to the crankcase.

 

2.The oil level is too high; remove oil from the crankcase.

•If the oil level is too low, add a small amount of oil slowly to the oil-fill tube, and then repeat steps 3 through 5 until the oil level is correct as shown in Figure 7.

•If the oil level is too high, drain the excess oil until you obtain the correct oil level on the dipstick. To drain the excess oil, refer to Changing the Engine Oil (page 17).

Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine.

6.Install the dipstick securely by hand.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Introduction TimeMaster 30in Lawn MowerSafety General OperationSlope Operation Children ServiceGeneral Service Safe Handling of GasolineSafety and Instructional Decals 114-7982Setup No Parts Required ProcedureAssembling the Handle Installing the Blade-control Bar Parts needed for this procedureFilling the Engine with Oil Charging the Battery Product OverviewBefore Starting Recommended Fuel Using Fuel Stabilizer/ConditionerOperation Filling the Fuel TankAdjusting the Cutting Height Checking the Engine Oil LevelStandard Model Adjusting the Handle HeightStarting the Engine Electric-start ModelUsing the Self-propel Drive Stopping the EngineEngaging the Blade Disengaging the Blade Using the Grass BagNot Using the Grass Bag Checking the Blade-stop System OperationInstalling the Grass Bag Recycling the ClippingsBagging the Clippings Removing the Grass Bag Installing the Side-discharge ChuteSide-discharging the Clippings Removing the Side-discharge ChuteCutting Grass Operating TipsGeneral Mowing Tips Cutting LeavesMaintenance Recommended Maintenance SchedulesPreparing for Maintenance Servicing the Air Filter Changing the Engine OilService Interval Every 25 hours Installing the New Battery Replacing the BatteryRemoving the Old Battery Replacing the FuseAdjusting the Self-propel Drive Cable Servicing the Blade-drive SystemPreparing to Service the Cutting Blades Servicing the Cutting BladesInspecting the Blades Checking for Bent Blades Removing the BladesInstalling the Blades Washing Underneath the Machine Preparing the Fuel System StorageGeneral Information Preparing the EnginePage Page Toro Total Coverage Guarantee

20199, 20200 specifications

The Toro 20200 and 20199 are two versatile and innovative products designed to enhance landscaping and maintenance tasks for both professionals and homeowners. These models offer a range of features and technologies that cater to various needs, making them a top choice for turf care.

One of the primary features of the Toro 20200 is its efficient 21-inch cutting deck. This deck size provides the perfect balance between maneuverability and cutting efficiency, allowing users to tackle both small and medium-sized yards with ease. The 20199 model boasts similar dimensions, ensuring it can fit into tight spaces while still covering considerable ground.

Both models are equipped with Toro's proprietary Recycler cutting system. This technology allows for superior mulching capabilities, ensuring grass clippings are finely shredded and distributed back onto the lawn. This process not only enhances the appearance of the lawn but also contributes to its health by returning essential nutrients to the soil.

The power behind the Toro 20200 and 20199 comes from their robust engines. Both models utilize efficient gas engines that deliver ample power for cutting through tough grass, while also being designed for fuel efficiency. This ensures longer run times between refueling, saving both time and energy for users.

Ease of use is a hallmark of the Toro brand, and these models exemplify that. The self-propelled drive system on both the 20200 and 20199 models simplifies operation by allowing users to set their walking pace, making mowing less strenuous. Additionally, the adjustable cutting heights provide versatility for various grass types, ensuring optimal results throughout the growing season.

Durability is another key characteristic, with both models featuring sturdy construction to withstand the rigors of regular use. This durability is complemented by Toro's commitment to customer support, ensuring that users can rely on their equipment for years to come.

In summary, the Toro 20200 and 20199 are exceptional lawn mowers that combine efficiency, power, and user-friendly features. With their advanced technologies and robust design, these models stand out in the marketplace, making lawn care an achievable task for everyone, from novice gardeners to seasoned landscapers. Whether for residential or commercial use, these mowers offer reliability and performance to keep lawns looking their best.
Top Page Image Contents