Toro 20199, 20200 owner manual Setup, Assembling the Handle, No Parts Required Procedure

Page 5

104-7953

Electric-start model only

1.Warning—read the Operator's Manual for information on charging the battery; contains lead; do not discard.

2.Read the Operator's Manual.

Setup

Important: Remove and discard the protective plastic sheet that covers the engine.

Assembling the Handle

Figure 3

1. Upper handle

2. Knob (2)

No Parts Required

Procedure

WARNING

Assembling and unfolding the handle improperly can damage the cables, causing an unsafe operating condition.

• Do not damage the cables when unfolding the handle.

•If a cable is damaged, contact an Authorized Service Dealer.

1. Rotate the upper handle so that it nests together with the lower handle (Figure 3), and tighten both knobs on the handle to lock the upper handle in place (Figure 4).

Figure 4

1. Handle-lock lever

2. Release the handle-lock lever (Figure 4).

3. Pull the handle rearward and lock it into position (Figure 4).

Image 5

Contents TimeMaster 30in Lawn Mower IntroductionSlope Operation SafetyGeneral Operation General Service ServiceChildren Safe Handling of Gasoline114-7982 Safety and Instructional DecalsAssembling the Handle SetupNo Parts Required Procedure Filling the Engine with Oil Installing the Blade-control BarParts needed for this procedure Product Overview Charging the BatteryOperation Using Fuel Stabilizer/ConditionerBefore Starting Recommended Fuel Filling the Fuel TankChecking the Engine Oil Level Adjusting the Cutting HeightStarting the Engine Adjusting the Handle HeightStandard Model Electric-start ModelEngaging the Blade Using the Self-propel DriveStopping the Engine Not Using the Grass Bag Using the Grass BagDisengaging the Blade Checking the Blade-stop System OperationBagging the Clippings Installing the Grass BagRecycling the Clippings Side-discharging the Clippings Installing the Side-discharge ChuteRemoving the Grass Bag Removing the Side-discharge ChuteGeneral Mowing Tips Operating TipsCutting Grass Cutting LeavesPreparing for Maintenance MaintenanceRecommended Maintenance Schedules Changing the Engine Oil Servicing the Air FilterService Interval Every 25 hours Removing the Old Battery Replacing the BatteryInstalling the New Battery Replacing the FuseServicing the Blade-drive System Adjusting the Self-propel Drive CableInspecting the Blades Preparing to Service the Cutting BladesServicing the Cutting Blades Removing the Blades Checking for Bent BladesInstalling the Blades Washing Underneath the Machine General Information StoragePreparing the Fuel System Preparing the EnginePage Page Toro Total Coverage Guarantee

20199, 20200 specifications

The Toro 20200 and 20199 are two versatile and innovative products designed to enhance landscaping and maintenance tasks for both professionals and homeowners. These models offer a range of features and technologies that cater to various needs, making them a top choice for turf care.

One of the primary features of the Toro 20200 is its efficient 21-inch cutting deck. This deck size provides the perfect balance between maneuverability and cutting efficiency, allowing users to tackle both small and medium-sized yards with ease. The 20199 model boasts similar dimensions, ensuring it can fit into tight spaces while still covering considerable ground.

Both models are equipped with Toro's proprietary Recycler cutting system. This technology allows for superior mulching capabilities, ensuring grass clippings are finely shredded and distributed back onto the lawn. This process not only enhances the appearance of the lawn but also contributes to its health by returning essential nutrients to the soil.

The power behind the Toro 20200 and 20199 comes from their robust engines. Both models utilize efficient gas engines that deliver ample power for cutting through tough grass, while also being designed for fuel efficiency. This ensures longer run times between refueling, saving both time and energy for users.

Ease of use is a hallmark of the Toro brand, and these models exemplify that. The self-propelled drive system on both the 20200 and 20199 models simplifies operation by allowing users to set their walking pace, making mowing less strenuous. Additionally, the adjustable cutting heights provide versatility for various grass types, ensuring optimal results throughout the growing season.

Durability is another key characteristic, with both models featuring sturdy construction to withstand the rigors of regular use. This durability is complemented by Toro's commitment to customer support, ensuring that users can rely on their equipment for years to come.

In summary, the Toro 20200 and 20199 are exceptional lawn mowers that combine efficiency, power, and user-friendly features. With their advanced technologies and robust design, these models stand out in the marketplace, making lawn care an achievable task for everyone, from novice gardeners to seasoned landscapers. Whether for residential or commercial use, these mowers offer reliability and performance to keep lawns looking their best.